Reply
Super Contributor
Posts: 3,889
Registered: ‎06-02-2009

Re: Looks like I'm gonna try and build a guitar...

Dang that looks like fun!
Please use plain text.
Super Contributor
Posts: 1,093
Registered: ‎05-15-2009

Re: Looks like I'm gonna try and build a guitar...

Neal... nice work so far. Touching on what Gary and Freeman said about hand planes, scrappers, and chisels, I wanted to comment that I have a couple of books by Garrett Hack that I strongly recommend that you read. I'd be more than happy to send them to you to use. Also, I do have some nice waterstones and sharpening jigs you can use if you aquire some tools. I'm sure Gary or Freeman will agree that having your plane irons and chisels VERY sharp (google Scary Sharp) is probably the single most important thing when using hand tools. With scrapers, it's not difficult to put the correct burr on the edge but it you do need to know how to do it to get the result that you want. I have a video from a Danish furniture maker that shows a very quick, simple, and effective method of properly setting up scrapers that you're also welcome to borrow.

I will warn you now... hand tools are probably worse than guitars as far as GAS goes. Once you know how to use them they're addicting and multiply like rabbits. For chisels, look for crappy old Stanleys at garage sales because you can find them REALLY CHEAP and the old ones used great steel. You can get a set of scrapers at a woodworking store $15 or less and they don't have to be fancy at all. For hand planes, go on Ebay and find an old stanley block plane with an adjustable mouth. Don't buy new planes unless they're LieNiesons. Old ones are the best. You should be able to score one for $30-$40 and will have a "lifetime" tool. They're very handy for general carpentry (house hold projects) too.

If your take the time to learn how to sharpen and use these tools, you'll find it's one the most satisfying things you'll ever do. In my case, I used to go in my woodshop and hand plane wood to see how thin of shavings I could make and to hear that "woosh" sound.

Again, good luck on your build... I envy you!
Guitars? Too damn many, but not enough!
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Funny you should mention tools. I was thinking of picking up a coping saw and a chisel to maybe do some of this work at home. I'm nervous about using the band saw on my top and I thought I'd carve the bracing and voice my top here at home. I couldn't see me using a plane to thin down my top to the desired thickness though.

Of course, I've also wondered how hard it would be to build my own go-bar deck too though. I'd have to fashion a radius dish though...

Actually, I've been contemplating on being a visual artist again (I went to art school and did some graphic design some years ago) and get into doing my own inlay art. Not yet though. I've already started sketching out some ideas and have been playing with line art in Adobe Illustrator as a means of making templates. I've also been contemplating on picking up a set of jeweler's files. I need to cut my own nut after all...
Please use plain text.
Super Contributor
Posts: 1,190
Registered: ‎06-28-2006

Re: Looks like I'm gonna try and build a guitar...

In the concerning absence of Knockwood, I feel it beholden on me to issue the following warning.

IF you feel it absolutely necessary to cut your own nuts, one simple accidental slip and there's your pecker off.

Take care
Please give me talent and patience - lots and soon.

HCAG Civil Posters Society
Charter Member 005. Ignoring yer man permanently.
Please use plain text.
Super Contributor
Freeman Keller
Posts: 10,605
Registered: ‎09-15-2003

Re: Looks like I'm gonna try and build a guitar...

Amen to what LiFe says about good sharp tools. I've used the Scary Sharp method and swear by it - it really is a pleasure to use a quality sharp chisel. Remember that for years guitars were built with only hand tools and many good luthiers still use only limited power tools (and no frekin'g cnc's)

And Neil, building a go-bar really is pretty easy - look at the go-bar "kit" at StewMac, then go to Home Depot, buy the parts and do it yourself. The only problem is the bars themselves - I found a bunch of fiberglass wands in the hardware dept that were intended to hold little reflectors for driveways (I bought all the wands but none of the reflectors LOL).

Making a radius dish is more trouble - the most common method is to build a cradel for your router that straddles a piece of MDF and just go back and forth and round and round. I also heard of someone who hung is router from a tree 16 feet in the air on a rope, put the MDF under it and played Pit and Pendulum. I, on the other hand, gave some money to SM and they shipped me a nice one.

However, the coolest trick (and the one I still use on tops) is this one, it works perfectly well on the back and either with a go bar on just clamps.

http://www.kennethmichaelguitars.com/contourtool.html

I use some pretty cheap jewelers files for small cleanup, but for nut work you really need a set of the correct files. Pucker up, get the right ones and you'll be making nuts for a long time.
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

LOL @ the Pit and Pendulum jig, Freeman. I've heard about the cradle jig/go round method. In fact there's a youtube video out there of it in action. Most likely YJ and I will procure one.

As for the go bar deck, YJ has one and he does use fiberglass dowels. He warned me that they tend to crack and the splinters are nearly invisible so they're a b~tch to get out of your fingers. Again, I probably won't need to make one unless I don't get to bracing after the winter snows set in making it hard to get to YJ's place down there in cow tipping territory.

As for the hand tools, I'm really think that I'm pushing my luck with the band saw - especially since my top cracked already. I was thinking that a coping saw might be a good alternative to cut the outline of my top and back. Heck, I wonder if I could use it to shape the billets into braces? I know I'll need a good chisel for that.

BTW, I'm trying to figure out the logic behind the use of fanned index cards in that link. Are the braces already radiused on the bottom and the cards are just there for the top to rest upon so that they can be clamped on with a go-bar deck? If so, then it's just a matter of figuring out the radius of the bottom of each individual brace using Kinkead's method of making a curved template for each brace? I'm assuming that the most logical thing is to make the X braces in this fashion and use that as a basis for all the other braces?
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

I went over to YJ's last night to try and whittle away at the cedar top some more. Thicknessing sure is slow going. All the molds are cut and I took them home to sand flush. A lot of stuff followed me home in fact.

I stayed up late last night in my own little workshop and checked to see if everything lined up against the plans. They did not. I'm confused, because my cardboard template does not seem to be as "off" as the lines on my mold are.

Back to the drawing board: I've retraced the outline and bracing pattern on clear acrylic - being extra careful that everything is accurate to the best of my ability. I haven't figured out what happened with or what to do exactly with the molds, thoouh. FWIW, I think I might be able to shim the interior of the mold somehow and the cutouts for the bender are still usable provided I can sand them square to the correct outline.
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

I'm tossing the molds and starting over from scratch. I went to Kinko's and copied my blueprints and got some good advice to follow through on over at the official luthier's forum. Now I have a better idea of what I need to do.

BTW, now I have TAS. I got a reallly good deal on a 9" band saw from YJ. Next on my list is a router.
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Sanding MDF sucks. I'm starting over on the molds because they're just not good enough. Live and learn. Next time:

- birch plywood
- cut a single board at a time, not 3 and use RELIEF CUTS to keep the band saw blade from binding up.
- cut outside the line and sand it until it's perfect
- cut the rest (11 more) similarly but don't worry about sanding
- acquire a router and a pattern bit and use the perfect mold as a guide
- do the bending forms separately (which is wasteful but I'll find use for the scrap I'm sure)
- same as with the outside mold, get one 3/4" thick form perfect and follow the same instructions.

..then I have to do the spreaders.
Please use plain text.
Super Contributor
guitarist21
Posts: 5,523
Registered: ‎07-29-2006

Re: Looks like I'm gonna try and build a guitar...

WHOA! What a great thread to read through and catch up on. Best of luck to you, kwak, and I can't wait to read more!
I should be practicing.
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Thanks, Ellen! So far it's a hobby but who knows? I'm not likely to give up playing though.
Please use plain text.
Super Contributor
Posts: 1,942
Registered: ‎03-02-2008

Re: Looks like I'm gonna try and build a guitar...

sorry I havent been about to comment Neal .... but great stuff so far . I was lucky having my moulds made by LMI but am just about to start my next from scratch ... in MDF - we'll see how that goes lol.

TAS is particularly dangerous. I actually sold a good watch so I could expand my collection . I still want some good carpenters vices, more clamps, some more chisels and planes - the list goes on lol. Heres what the place looks like now after a bit of expansion of the worksurfaces and some "tool acquisition"





be prepared for a long and expensive ride now you've started, but hell, its just too much fun

for go-bars I used wooden dowel rods, sharpened at one end with a pencil sharpener, then with small bits of leather superglued onto those ends to make them more "grippy". It worked a treat and was what you could call "cost effective". Plus, they were dead easy to size if needed. The deck was 2 bits of wood screwed to some agglo for rigidity at the base and some threaded rods surrounded by plastic plumbers pipe to protect the guitar from bangs. Its nice and simple to make.

Keep the pics coming - great stuff
imagination is more important than knowledge. knowledge is limited. imagination encircles the world.

viva fui in silvis
sum dura occisa

securi dum vixi tacui

mortua dulce cano
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Good to hear from you, Rick.

A word about the MDF, it cuts and sands like butter but from what I've heard it soaks up water and glue. I'm moving up to birch plywood which is still relatively cheap, even if it doesn't look at "clean" as MDF. That being said, I've yet to actually work with the stuff. What I've seen at my local mega hardware store looks like it may be prone to chipping.

As for how to make a mold, the archives at the Official Luthier's Forum are a pure gold mine. Here's a useful link on how to make outside molds:
http://www.luthiersforum.com/forum/v...02&t=14138&%22

As for tool acquisition, I have to be very careful. While money is not tight, we have a budget to keep and small children to feed/clothe and a house that constantly needs something fixed. I'd love to pick up a cheap little router and there's a special at Rockler for a pattern bit that would save me a LOT of work cutting/sanding the molds. One good thing is that I now have that 9" band saw to do the rough cutting with - though the blade always seems to be loose.

I'm starting to wonder if I'll ever actually start working on the guitar though. I stuck at thicknessing it and we just don't have sand paper that's course enough; we've been using 120 when I need at least 80 grit. I think I've passed my cedar through the drum sander about 60 times so far and I'm starting to lose patience.
Please use plain text.
Super Contributor
Posts: 1,942
Registered: ‎03-02-2008

Re: Looks like I'm gonna try and build a guitar...

I know the feeling about tight money and kids ... thats why I had to sell my moonwatch to get more tools

I had to read up and ask Gary about setting up the bandsaw - its sometimes a tricky business, and I lacked the knowledge, but once done its a great bit of kit. I would highly recommend the Bosch GKF600 router ( http://www.axminster.co.uk/bosch-bos...al-prod784588/ ... I know thats a UK site but you'll probably get the same cheaper in the USA) that Gary recommended to me. It makes so much that you'll be doing easier, with a lot less risk of things like tear out when doing the binding prep etc. The kit also has the tilting base included. That makes it simpler to angle the router during the binding prep which is needed due to the radius of the top and back. If you can afford it its a brilliant tool

Thicknessing - I'll be starting soon on working on that aspect. I got a random orbit sander and some new planes so .... we'll see how it goes lol.

All starts to get better once the real "putting together" starts so keep at her, you'll love the process

MDF can be sealed once the workpiece is completed to avoid any moisture uptake too
imagination is more important than knowledge. knowledge is limited. imagination encircles the world.

viva fui in silvis
sum dura occisa

securi dum vixi tacui

mortua dulce cano
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

I'm not concerned about getting a router right now, though I've seen a Ryobi at Home Depot for $60 which is about half what the Bosch routers I've seen go for. I'm more concerned about getting a table to work on, preferably one that can house a router so that I can mount a sanding bobben or a pattern-tracing bit on. It'd also be nice to work with that bandsaw while standing and not sitting on the floor of my garage.

Which reminds me. I could really use a shop vac.

In the meantime I need materials and some more design ideas. I still haven't decided on a rosette or a headstock inlay. I still don't want to use abalone unless it is very minimal.

BTW, which do you think would go better visually/functionally with a guitar with mahogany back & sides and a western red cedar top? Ebony or rosewood bridge/fretboard/headstock overlay?
Please use plain text.
Super Contributor
guitarist21
Posts: 5,523
Registered: ‎07-29-2006

Re: Looks like I'm gonna try and build a guitar...

Quote Originally Posted by kwakatak View Post
BTW, which do you think would go better visually/functionally with a guitar with mahogany back & sides and a western red cedar top? Ebony or rosewood bridge/fretboard/headstock overlay?

Oooooh I vote rosewood.
I should be practicing.
Please use plain text.
Super Contributor
Posts: 1,942
Registered: ‎03-02-2008

Re: Looks like I'm gonna try and build a guitar...

Quote Originally Posted by kwakatak View Post
I'm not concerned about getting a router right now, though I've seen a Ryobi at Home Depot for $60 which is about half what the Bosch routers I've seen go for. I'm more concerned about getting a table to work on, preferably one that can house a router so that I can mount a sanding bobben or a pattern-tracing bit on. It'd also be nice to work with that bandsaw while standing and not sitting on the floor of my garage.

Which reminds me. I could really use a shop vac.

In the meantime I need materials and some more design ideas. I still haven't decided on a rosette or a headstock inlay. I still don't want to use abalone unless it is very minimal.

BTW, which do you think would go better visually/functionally with a guitar with mahogany back & sides and a western red cedar top? Ebony or rosewood bridge/fretboard/headstock overlay?
I like rosewood myself as well. My next will have Walnut back and sides and cedar top and I'm going to be using cocobolo rosewood for the binding with rosewood bridge/fretboard etc. I just think its that bit "richer" looking with a bit more character than ebony.
I mounted my bandsaw on an old bedside cupboard then put lockable castors on the bottom so it was mobile - its a cheap way to get it at a level where you could use it standing

Rosettes and things ... here are a couple of links. Both these guys do lovely stuff and are cheap :

http://stores.ebay.co.uk/Taisamlu-Mu...?_nkw=rosettes

http://stores.ebay.co.uk/bezdez_INLA...34Q2ec0Q2em322

There are a massive variety of inlay materials. Brass is nice to cut and use, as is using wood. Reconstituted stone I think looks interesting and I'm going to be using some of that next :

http://www.smallwonder-music.co.uk/s...t.asp?P_ID=437

I found it easiest using wood as its nice and simple to sand flush after placing into the cavity

I could use a shop vac as well, the sawdust has to be seen to be believed after working lol. The watch money has gone so I'll have to stick with my wee brush and pan for now
imagination is more important than knowledge. knowledge is limited. imagination encircles the world.

viva fui in silvis
sum dura occisa

securi dum vixi tacui

mortua dulce cano
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Quote Originally Posted by guitarist21 View Post
Oooooh I vote rosewood.
Yeah, I'm thinking rosewood too, Ellen. Ideally I'd like one with a really broad spectrum of colors - or at least a high contrast grain with maybe a reddish/purplish tint to it. Cocobolo would look really cool because of the reddish tint but I've heard horror stories about working with it. I've read that Brazilian rosewood is the "ideal" choice with mahogany back & sides but obviously I'm not gonna be able to swing that with my wife the accountant.

As for the inlay idea, you may be on to something with the reconstituted rock Rick. Those EIR rosettes with the abalone trim do look interesting as well.
Please use plain text.
Super Contributor
Posts: 1,942
Registered: ‎03-02-2008

Re: Looks like I'm gonna try and build a guitar...

Quote Originally Posted by kwakatak View Post
Yeah, I'm thinking rosewood too, Ellen. Ideally I'd like one with a really broad spectrum of colors - or at least a high contrast grain with maybe a reddish/purplish tint to it. Cocobolo would look really cool because of the reddish tint but I've heard horror stories about working with it. I've read that Brazilian rosewood is the "ideal" choice with mahogany back & sides but obviously I'm not gonna be able to swing that with my wife the accountant.

As for the inlay idea, you may be on to something with the reconstituted rock Rick. Those EIR rosettes with the abalone trim do look interesting as well.
I think its supposed to be "oily" and hence may give problems with glueing. Its dead easy to bend (I was going to do the binding on mine until I changed to maple and bent the cocobolo) and I believe if you give it a bit of a rub down with alcohol prior to glueing you should have no problems

That recon rock is damned cool eh?
imagination is more important than knowledge. knowledge is limited. imagination encircles the world.

viva fui in silvis
sum dura occisa

securi dum vixi tacui

mortua dulce cano
Please use plain text.
Super Contributor
Posts: 12,837
Registered: ‎10-14-2003

Re: Looks like I'm gonna try and build a guitar...

Actually, I'ver heard that cocobolo can spur some serious reactions to those who are allergic to it. Tim McKnight has to be careful with it because his wife Mary is highly allergic to the dust and he had to upgrade his shop's ventilation system. Still, it's a very pretty wood.

I've seen examples of EI rosewood which had red and purple streaks in it, not just the typical brown. I'm assuming that it had to do with the finish aging though. For example, I'd love to get my hands on some rosewood with the same type of grain as on my Takamine:



Please use plain text.