BCB-6 Pedal Case

oh yes, if noone short-circued a local nuclear station to the socket you use - you will have no noise. As for the reduction of the tone individuality - dunno, not as big as Boss Me-50 does anyway. Imo, it is the problem of the pedals, not of the case.

plastic. after one year, both locks broke down, so our guitar player had to use a wire to close that thing. and don't jump on it too much.

Just plug all you boss pedals, and woila! some problems might occur if you want to keep all the stuff in that box - 5 pedals + adaptor + cables might not fit. /-:

if you have only boss pedals - go for this case to easen your life with all those sockets, cables, batteries and power supplies. otherwise - forget about it, go to a local store and buy yourself a good backpack - you can carry all your pedals stuff in it, including powersupplies etc.

4 sound... didn't quite hear anything... until de case actually dropped... luckily it was secured, n it was really LOUD (de case... LOL)

sturdy n tough... it'll protect de pedals... de only thing 2 take note of is de 2 rubber paddings on de outer underside of de case... meant 2 prevent de case from slipping, but eventually the rubber won't last n will bcome kinda hard, thus no more grip...

firstly, i got this discontinued pedal case (came wif the PSM-5) cos i own a number of boss pedals... mainly to save me all the hassle of connecting every pedal together every time i play thus saving me LOTS of time... also to reduce de messy sight of wires crawling everywhere around my feet... setting up is easy only if: > u hv boss pedals that fits exactly in2 it wif only 1 ac adaptor input jack. that means 4 power supply, i can only use de PSM-5 power supply pedal (came with de case used) n i can't use de NS-2 noise suppresor, LS-2 line selector or even the TU-2 chromatic tuner 2 power up my pedals... this is bcos de new pedals come with 2 ac adaptor input jacks that make it impossible 2 fit it exactly in2 de case... > de adaptor input jack slot is quite low on the pedal... if u hv pedals that hv de adaptor input jack kinda high on de pedal, certain times, de plastic cover 4 de daisy chain might pop up... 4 me, it's really no big deal if it's once in a while, but i do find it a tad irritating... > u r using pedals that hv a single output jack... if u hv a pedal, e.g. chorus, delay or a reverb that hv 2 output jacks, it's really gonna test your nerves as de very 1st BCB-6 pedal case doesn't hv any room or space 2 cater 4 de stereo output of these pedals at the end of the effect chain. if u do notice, de BCB-6G came wif a slight difference that allows de connection of cables (in stereo or 4 looping) at de end n de beginning of the effect chain via de 2 cutaways at de left n right side of de BCB-6G case... compared 2 de original BCB-6 which doesn't cater 4 this setup... besides all that i've mention above, (don't get me wrong, dis is my observation) 2 my observation, if u r constantly changing de pedals configuration in dis case (pluggin n unpluggin de pedals), u might notice that de paint might get chipped off on the parts of the pedal that hv contact wif de grooves securing it in place... de PSM-5 that came with de case has it... 4 ease of use, setting up only boss pedals n leaving them there permanently is OK... besides that, my only complaint is de grooves securing de pedal (chipped paint) n de inability 2 connect pedals in2 stereo... i was kinda wondering y wasn't de space 2 store a tuner larger, so maybe i could've store extra pedals there... storing batteries in de storage slot is a no no... stored some there b4 n de little culprits were rattling inside de case... but 4 practicallity sake, it's worth parting wif jst a fraction of de dough...

never ever did found de need...

Practicallity sake 4 transportation, setting up n 4 basic storage of 6 Boss pedals... satisfactory n does it's basic job. pedals from other manufacturers... it's gonna b hard 2 find pedals wif de same dimensions as Boss pedals. either a Modify or a New Buy, *Sigh* constant removing, changing configurations, changing pedals... might chip de paint on your pedals. using pedals wif 2 outputs at the end of the effect chain... doesn't cater 2 this need; maybe a BCB-6G (unlikely) or get a cable with the angled-head jack. hving more than 6 pedals n wanting 2 store it inside this case... pray that maybe Boss will make a case for 9 or 12 (!) i dunno. until then, it's Modify or 2 cases together.