Login or Sign Up
Welcome, !
Logout
Join the HC Newsletter
Subscribe Now!
TFX1
(Click for a close-up)
TFX1 Control Panel
(Click for a close-up)
TFX2
TFX2 Control Panel
(Click for a close-up)
TFX3
TFX3 Control Panel
(Click for a close-up)

At Musikmesse, Laney launched their new TFX series of guitar amps, combining the company's Tube Fusion technology with their new X-Factor digital effects. A total of three combos have been announced, with the low-end TFX1 featuring a 10" speaker and 50 Watts of power, and the TFX2/TFX3 pumping 65 and 120 Watts of power respectively through a 12" speaker plus an ECC83 preamp tube.

All three models feature built-in digital effects, though the capabilities vary significantly. The TFX1 allows the selection of a single effect program, but with separate level controls for the clean and drive channels. The TFX2 adds independent effects program selection for the clean and drive channels on top of the separate level controls. The TFX3 is the most flexible of all the models with the same independent controls for clean and drive channels as the TFX2, but adding the ability to adjust the time/rate parameter of the selected effects programs.

Models and Specifications:

TFX1

  • 50 Watts RMS
  • 10" Custom Celestion driver
  • Clean and distortion channels with Bass, Mid, Treble controls
  • Tube Fusion tube emulation technology
  • Bright switch on clean channel
  • "Scoop" switch on drive channel
  • "Vibe" switch for EQ enhancements
  • Footswitch for channel selection and effects on/off
  • Digital Effects
    • 2 hall reverbs
    • Room reverb
    • 4 delays
    • 2 chorus
    • Flanger
    • 2 Rotary Speaker Simulators
    • Octaver
    • Chorus + Reverb
    • Chorus + Delay
    • Flange + Delay

TFX2

  • 65 Watts RMS
  • 12" Custom Celestion driver
  • 3-channel operation with Bass, Mid, Treble controls for clean (channel 1) and drive (channels 2 and 3)
  • ECC83 preamp tube
  • Bright switch on clean channel
  • "Scoop" switch on both drive channels
  • "Vibe" switch for EQ enhancements
  • Footswitch for channel selection and effects on/off
  • Dual Digital Effects with separate effects selection and level control for clean and drive channels
  • Clean effects:
    • 2 hall reverbs
    • Room reverb
    • 4 delays
    • 2 chorus
    • Flanger
    • 2 Rotary Speaker Simulators
    • Octaver
    • Chorus + Reverb
    • Chorus + Delay
    • Flange + Delay
  • Drive effects:
    • 2 hall reverbs
    • Multitap delay
    • 4 delays
    • 2 chorus
    • Flanger
    • 2 Rotary Speaker Simulators
    • Octaver
    • Chorus + Reverb
    • Chorus + Delay
    • Flange + Delay

TFX3

  • 120 Watts RMS
  • 12" Custom Celestion driver
  • 3-channel operation with Bass, Mid, Treble controls for clean (channel 1) and drive (channels 2 and 3)
  • ECC83 preamp tube
  • Bright switch on clean channel
  • "Scoop" switch on both drive channels
  • "Vibe" switch for EQ enhancements
  • Footswitch for channel selection and effects on/off
  • Dual Variable Digital Effects with separate effects selection and level control for clean and drive channels
  • Clean effects:
    • Variable hall reverb
    • Variable room reverb
    • Variable delay
    • Variable chorus
    • Variable Flanger
    • Variable Rotary Speaker Simulator
    • Variable Octaver
    • Variable Chorus + Reverb
    • Variable Delay + Chorus
    • Variable Flange + Delay
  • Drive effects:
    • Variable hall reverb
    • Variable multitap delay
    • Variable delay
    • Variable chorus
    • Variable Flanger
    • Variable Rotary Speaker Simulator
    • Variable Octaver
    • Variable Chorus + Reverb
    • Variable Delay + Chorus
    • Variable Flange + Delay
No comments
Join the discussion...
Post Comment
More Cool Stuff
presented by Team HC Chords are the foundation of all of those guitar riffs you...
Volume filters for your ears Your ears. For a musician, they are just about the ...
x
sign in
x
contact us
*Indicates required fields
Name *
Email Address *
Issue Type *
submit
x
message
okay
please wait