Login or Sign Up
Welcome, !
Join the HC Newsletter
Subscribe Now!

Neo Imager is a hybrid tool which combines a Stereo Enhancer and an
Imager. You can adjust both the stereo position of your music/tracks
and enhance that stereo feeling as well. It is very useful when you
need put an instrument into a different position, or make a mono
recording "pop" into a stereo feel.

Neo Imager use a new technology which we call "Enhanced M/S Matrix",
which enables you to rotate the sound, make it wider or put it into a
deeper position. You can also add a delay effect and/or a natural
damping effect to the sound, which really creates a natural stereo

Using traditional methods, changing a mono sound to a good sounding
stereo image is "nearly" impossible. Engineers will often apply some
delay to one channel and that sounds a little bit better than mono but
it still cannot compare to a true stereo sound. Neo Imager is a stereo
enhancing plug-in that is based on a revolutionary approach which we
call Partial True Stereo Convolution. In a real space, the sound
usually comes from a single point. We are able to identify where the
sound is because the signal reaching our right ear is different than
the one reaching our left. The timing of arrival may be slightly
different and the natural reverb of the space will differ as well. The
different route the sound takes through the space is combined with
different early reflections allowing our brains to pinpoint the sound.

In theory, if you could capture the True Stereo IR at the recording
point, you could recreate the stereo with a mono signal. In practice,
Sound Magic chose to concentrate only on those early reflections which
are around the Haas Effect Range. In this way, the resulting sound
will have the spatial feeling without too much of the reverb feelings.
By using this method, Partial True Stereo Convolution not only creates
a better, more natural sound than traditional methods, but it also can
re-create the spatial feeling.

If you have ever felt the need to have a little more control over the
stereo image of your recording, Neo Imager is a must-have tool for
your library.

Neo Imager shares the same True Stereo IR library with Neo Reverb,
which make it easy to extend with more space types.


Internal 64-bit floating point precision

Innovative Enhanced M/S Matrix enables users to adjust stereo position
with meticulous controls.

Innovative Partial True Stereo Convolution Technology adds realistic
stereo feeling to your mono tracks, and enhanced the stereo feeling
for current stereo tracks

Delay and Damping effects enables a better position feelings.

A/B setting makes it very convenient to A/B comparison.

Support up to 32Bit/384KHz resolution.

For more information, download demo version, please visit

No comments
Join the discussion...
Post Comment
More Cool Stuff
Way Huge Doubleland Special Overdrive Pedal Bonamassa good ....   by Chris ...
Dear Musician – Music Thanks You! You thank it back …   by Den...
sign in
contact us
*Indicates required fields
Name *
Email Address *
Issue Type *
please wait