Port City Amps Adds 4x10 Speaker Cabinet to the Wave Series

The Wave 4x10 cabinet is totally unique in its appearance however, the magic of this cabinet lies within. The Port City Wave cabinet is constructed with a 5-inch wide, 45-degree angle sound deflecting rear panel. This panel is dadoed on both sides of the cabinet for ultimate support. Internal sound waves are projected from the back of the speaker down to the bottom of the cabinet where another 45-degree panel projects sound waves towards the front of the cabinet. A 1-1/2 inch angled port runs the width of the cabinet and projects these sound waves out towards you. (Made of 13 ply void free Baltic birch.)

Not only do you hear the sounds from the speakers, you also hear the sound normally "lost" inside your cabinet. This design results in a much more responsive and louder cabinet. The tone produced from the Wave cabinet is smooth, even, focused and clear. It is not designed to boost or cut any certain frequencies. It is designed to harness all the sound your speaker produces. The main benefit is the dynamic response. When you dig into a bend or chord on your guitar you can hear and feel the difference with the Port City Wave cabinet.

Retail cost $525