Furman® M-8S Power Conditioner and Sequencer (120V Regions)
The newest member of the Furman® value-priced Merit Series, the 15 Amp M-8S power conditioner and sequencer, protects audio systems from a wide range of power problems. Featuring nine NEMA 5-15R outlets (six sequenced on rear panel, two unswitched on rear panel, and one unswitched on front panel) in a sturdy 1-RU chassis, the M-8S provides peace of mind with Furman's standard level surge protection and filtering. With three-stage power sequencing (three banks of two outlets each), users can manage the power-up and power-down sequence of their system, avoiding problems such as circuit breaker trips, voltage sags and speaker pops. The device's sequencing can also be controlled by a momentary or maintained switch via a rear panel block.
Furman® PS-8R E III Power Conditioner and Sequencer (220V-240V Regions)
An upgrade to the popular Furman® PS-8R E II power sequencer, the PS-8R E III provides power protection, filtering and sequencing for audio systems in 220V-240V regions. Furman Series Multi-Stage Protection (SMP) technology provides professional-grade protection from surges and spikes while Extreme Voltage Shutdown (EVS) safeguards against dangerous voltage conditions. Linear Filtering Technology (LiFT) reduces line noise in the audio/video bandwidth to ensure maximum equipment performance. The unit provides nine IEC C13 outlets (six sequenced on rear panel, two switched on rear panel, and one switched on front panel) at 10 Amp capacity in a sturdy 1-RU chassis. With three-stage power sequencing (three banks of two outlets each), users can manage the power-up and power-down sequence of their system, avoiding problems such as circuit breaker trips, voltage sags and speaker pops. The device's sequencing can also be controlled by a momentary or maintained switch via a rear panel block; while the unit's BNC connector conveniently allows the attachment of an optional 12VDC gooseneck lamp for rear illumination. Improvements from the PS-8R E II include externally adjustable delay and remote interface configuration settings as well as a more compact chassis design.
Furman® P-8 PRO C Classic Series Power Conditioner
The newest addition to the Furman® Classic Series for audio/video professionals, the P-8 PRO C delivers the same trusted protection and filtering as the Furman PL-PRO DMC, with a minimalistic front panel design ideal for use in applications where front panel metering and illumination are not required. Features include a 20 Amp rating and renowned Furman Series Multi-Stage Protection (SMP), which virtually eliminates service calls, thanks to the technology's ability to safely absorb, clamp and dissipate transient voltages. Ensuring optimal performance, the nine-outlet device is also equipped with Linear Filtering Technology (LiFT) to protect against digital data loss and damage from extreme voltage spikes and excessive AC noise, while removing the need to reboot digital presets. With Extreme Voltage Shutdown (EVS), the P-8 PRO C safeguards gear from sustained over-voltage conditions by constantly monitoring incoming voltage. In the event of a voltage over 137VAC, the unit and all connected equipment are immediately shut down.