Dynacord Presents DSA Power Amplifier Series For Fixed Installations

In its new DSA series, German amplifier specialist Dynacord is offering four new power amplifiers for the fixed installation sector The new models offer first-class performance, rock-solid components and technology, and wealth of options An RCM-810 module allows supervision and remote control of the DSA series via IRIS-Net The DSA series comprises four models: the DSA-8204 (2 x 450 W), the DSA-8206 (2 x 600 W), the DSA-8209 (2 x 900 W) and the DSA-8212 (2 x 1200 W). Designed for fixed installation, these new amplifiers are remarkable for their stable output power, very high efficiency, and superlative performance. A wealth of carefully considered details illustrates the concern of the developers to find the ideal response to the practical demands of day-to-day use. For this reason, the devices are equipped with Phoenix inputs and outputs, level controls on the rear panel, a switchable 50 Hz / 18 dB high-pass filter, and a ground lift switch. In addition to rock-solid components and technology, the DSA series offers ease-of-use and a wide range of options. The Power Remote for example, provides a convenient, remote activation of DSA power amplifiers, and all four models in the DSA series support the use of the RCM-810 module, which introduces magnificent new possibilities, such as integration with IRIS-Net, which allows for remote control (Configuration, Power On/Off, Power On Delay, Mute, and VLD) and supervision (Load supervision for each channel, Output VU, Protect, Limit, Pilot Tone, Temperature, and Gain/Sensitivity). A GPIO block also offers the additional advantage of two inputs and outputs for control, and two additional reference outputs (+5V, 200mA/GND). The four models in the DSA series:

DSA-82042 x 450W / 4 Ohms

DSA-82062 x 600W / 4 Ohms

DSA-82092 x 900W / 4 Ohms

DSA-82122 x 1200W / 4 Ohms