DYNACORD continues its rich tradition of manufacturing high-performance amplifiers with the three models of its new DSA Multi Channel series, which is setting new milestones in the development and manufacture of high-performance power amplifiers for installation. The new models are remarkable for their very high output, their high degree of efficiency, and their ability to integrate with IRIS-Net. Each new model was created with the same solid production quality and ground-breaking technology common to every Dynacord product. The new amplifiers' Variable Load Drive (VLD) technology makes them uniquely flexible. Each channel can be individually configured to deliver a maximum power of 500 watts or 1,000 watts into any load from two to 10 ohms, or drive 70 or 100 Vrms loudspeaker lines directly without an output transformer. When connected to an optional RCM-810 module, users can configure the new power amplifiers with the help of IRIS-Net to deliver maximum output per channel in a range from 100 watts to 500/1,000 watts in one-watt increments into any load from two to 10 ohms (adjustable in 0.1 ohm increments). In addition to state-of-the-art technology, the amplifiers exhibit robustness, the highest production quality, and a host of practical features, including electronically balanced Phoenix input sockets, level controls on the rear panel, a switchable 50 Hz / 18 dB high-pass filter, and a ground lift switch. DSA Multi Channel amplifiers can also be used with RCM-810 modules for simple, cost-effective integration with IRIS-Net, which provides numerous advantages including remote control (Configuration, Power On/Off, Power On Delay, Mute and VLD) and supervision (Load supervision for each channel, Output VU, Protect, Limit, Pilot Tone, Temperature and Gain/Sensitivity). A GPIO block also offers the additional advantage of two inputs and outputs for control, and two additional reference outputs (+5V, 200mA/GND).
- In addition to the standard DSA series, Dynacord offers the DSA Multi Channel series: Comprising three models, this new series offers not only power and performance but also a high degree of flexibility
- An RCM-810 module allows supervision and remote control of the DSA series via IRIS-Net
- The DSA Multi Channel series sets a new standard in fixed installation
The three models in the DSA Multi Channel series
DSA 88058 x 500W2/4/8 Ohms / 70Vrms / 100Vrms
DSA 84054 x 500W2/4/8 Ohms / 70Vrms / 100Vrms
DSA 84104 x 1000W2/4/8 Ohms / 70Vrms / 100Vrms