Login or Sign Up
Welcome, !
Join the HC Newsletter
Subscribe Now!
Brace Audio is proud to announce it is now shipping the DWG1000-TX Digital Wireless Transmitter, at $99.99 US List, as an aftermarket product for their DWG1000 Digital Wireless System, the most flexible guitar and bass wireless system in the world. The Brace Audio DWG1000 Digital Wireless System is the only US-made, ultra-compact, multi-transmitter-capable wireless system that delivers unprecedented, professional-level performance and pristine audio quality for under $150.00 US List. Retailers will appreciate the DWG1000-TX Wireless Digital Transmitter as an essential up-sell accessory for the fastest selling guitar wireless system on the market. Barry Goldstein, Grammy Award-winning producer, states, "Every once in a decade a product comes along that makes everyone's job a bit easier." A working guitarist who relies on multiple instruments onstage can now afford a DWG1000-TX Wireless Digital Transmitter on each guitar for fast and effortless instrument changeover and consistently impeccable audio quality. Brace Audio's ALLâ„¢Automatic Channel Selection and Locking instantly and transparently links the transmitter to the receiver when the units are powered on. Each guitar can have its own transmitter and can individually link to the same receiver at any one given time. Eight to twelve systems can be used at a given time. The DWG1000 Digital Wireless System offers a wide frequency response of 10Hz to 15kHz for thunderous lows and crystal-clear highs while providing an operational range of 100-feet from the base unit. Brace Audio technology converts the guitar signal into pure digital audio and transmits it to the receiver using 2.4GHz Frequency Hopping Spread Spectrum (FHSS) transmission on any one of over 65,000 channels. During the conversion back to analog, the many problems inherent in outdated analog systems, such as audio hiss, crackle, signal loss, and RF interference, are eliminated. The Brace internal antenna operates much more efficiently at 2.4GHz than UHF/VHF. Furthermore, unlike UHF/VHF systems, by using 2.4GHz, the Brace wireless is useable all over the world. In addition, Brace Audio's unique technology does not use any companding (compression/expansion), which is necessary on other wireless systems to mask their noise floor. The benefit of Brace Audio's non-companding system is there are no side effects such as dynamic mistracking, perceived roughness of the low frequency content (especially noticeable on bass guitar), "pumping and breathing," and other non-linear characteristics that result in distortion of frequency response and signal. Lightweight and portable, the Brace Audio Transmitter and Receiver units are also remarkably rugged. Brace Audio Wireless Systems can be used in any country in the world and include a declaration of conformity, so touring musicians will never have to worry about their wireless systems being confiscated when traveling internationally. Specifications:
Product contains
  • 1 Transmitter
  • 1 Receiver
  • 2 - 1/4" to 1/8" Guitar Cables
  • Belt Clip
  • RF Output Power: 16 dBm
  • Maximum Input Level: 2.75V peak to peak
  • THD: <2% @ 800mV pp 1kHz tone
  • S/N Ratio: more than 90dB
  • Battery Life: 5 hours (AA size battery)
  • Output: 33mm, 1/8". mono Jack
  • System gain: 1
  • Frequency: 2.4GHz, FHSS
  • Input Impedance: 600KOhm
  • Operating Power Voltage: 3.0V Typical
  • Audio Frequency Response: 10Hz - 15kHz
  • Lower Battery Alert: 15 minutes of life left
  • Antenna: Internal dome
  • Units operating at same time: 8-12
  • Frequency Type: 2.4GHz, FHSS
  • Battery Life: 7 hours (AA size battery)
  • Easy press function button to change channels
  • ALL Auto Channel Lock System
  • Link LED Low Battery LED
No comments
Join the discussion...
Post Comment
More Cool Stuff
Summer NAMM 2017 - Show Report Hot city, warm people, cool gear   by Craig ...
Yamaha Recording Custom Birch beauties are back!   by Dendy Jarrett   ...
sign in
contact us
*Indicates required fields
Name *
Email Address *
Issue Type *
please wait