Jump to content

Martin SWDGT crack... Need some help!


ajk7193

Recommended Posts

  • Members

Hello everyone!

 

I am in need of some help regarding a crack on the side of my Martin guitar. Trying to get some ideas on if it is repairable and how much it would cost? I have attached a couple photos on here.

 

Thanks!

4ce2d0a4fe059a676c236267bd78ae94.thumb.png.ee80e46e29b0bfe28f5024b12d9ab0fd.png

Link to comment
Share on other sites

  • Members

It is repairable, I would want to see it to give an accurate estimate. I would use hot hide glue and put some cleats on the inside (it should already have some side reinforcements, either mahogany or linen strips). If I was doing the work I would not try to sand or scrape the crack perfectly flat on the outside, matching the color and finish would be very difficult. The crack itself might be $50 or so, if you really wanted the finish matched and oversprayed I might charge 50 - 100 more b(assuming the finish is nitro as on most Martins, if it is one of the modern catalyzed finishes I won't attempt it). . If it was badly splintered inside or wood was missing the cost could be significantly more.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...