Members Gomer_cinco Posted March 27, 2018 Members Share Posted March 27, 2018 So I recently picked up a modded 1978 50 watt Marshal JMP MK2. The high imput on it works and it has a footswitch now in place of a speaker output to switch from clean to dirty, but the low level imput has been disabled. Is there any way to modify the Low Level imput as to make it a Line Level imput? My plans are to use an A/B switch and run an effects processor in it (axe fx ii) so i can switch between the tones of the amp and pull off soundscapping / oddball tones /amp sims with the fx processor, or just plug in a mp3 player to jam along with tracks. If you have any advice on how to do this please shed some light. Tl;DR : How do i change the low level imput to a line level passthrough on a 1978 Marshal JMP MK2 Link to comment Share on other sites More sharing options...
Members 1001gear Posted March 28, 2018 Members Share Posted March 28, 2018 It won't play program material very clearly. If there's an FX loop you can go into the return of that. It still won't sound good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.