Members SuperStrat1977 Posted February 15, 2015 Members Share Posted February 15, 2015 I recently installed a Tone Monster SG-3D Nitro Booster and bypass switch in my guitar and have it wired as shown below. I also want to add an LED to it so when the bypass switch turns the booster on the light also turns on. I'm not sure of how to wire the LED into the circuit so is there anybody out there that knows how to wire it? Link to comment Share on other sites More sharing options...
Members onelife Posted February 15, 2015 Members Share Posted February 15, 2015 It would be a simple solution if you could find a suitable TPDT (triple pole double throw) switch. You could then use six of the nine connections as they are used on the DPDT switch in your diagram and use two of the remaing connections to connect an LED through a current limiting resistor to the battery. Link to comment Share on other sites More sharing options...
Members onelife Posted February 15, 2015 Members Share Posted February 15, 2015 something like this... Link to comment Share on other sites More sharing options...
Members SuperStrat1977 Posted February 15, 2015 Author Members Share Posted February 15, 2015 Thanks onelife, I'll give that a try. Is there an English translation for that diagram? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.