Members fretmonster Posted April 23, 2005 Members Share Posted April 23, 2005 OK here's the deal, jerry_pickers' got me all fired up about these strat sized P90s from Vintage Vibe guitars. I want to throw a set in my Dillion DS-100 (HSS config). Here's the problem: the bridge is two singles (humbucker pos) with separate elevation screws. So, can I just install the Biltoft P90s in the neck, middle and bridge position with the bridge position retaining an original single coil? Will it still work as a humbucker? Or should I order four Biltoft P90s in order to make it work. I've never installed pus, so it's all new to me. Thx Link to comment Share on other sites More sharing options...
Members k4df4l Posted April 24, 2005 Members Share Posted April 24, 2005 I am not sure I am following your question...do you want thoughts on putting a single coil in the humbucker route at the bridge vs installing two seperate single coils in the bridge bucker position? In your shoes, I would prb order up a humbucker sized P-90 (and there are a bunch of em out there) and use two of the strat sized P-90s in the middle and neck position. Clean, easy, done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.