Members StratoSlacker Posted April 28, 2008 Members Share Posted April 28, 2008 Can one take the pots out of a Gibson Les Paul and stick them in an Ephiphone Les Paul? Or do both brands use different shaft lengths? Different shaft diameters? Yes, I said shaft. Link to comment Share on other sites More sharing options...
Members StratoSlacker Posted April 28, 2008 Author Members Share Posted April 28, 2008 nobody? Link to comment Share on other sites More sharing options...
Members outtahear Posted April 28, 2008 Members Share Posted April 28, 2008 Yes-Might have to ream the holes in the Epi a bit. (Got REAM and HOLE in that one.........) Link to comment Share on other sites More sharing options...
Members nautaki Posted April 28, 2008 Members Share Posted April 28, 2008 nobody? I was looking at the RS Guitarworks website thinking about an electronics upgrade in my Epiphone and they say there that they use different shaft lengths so you need different kits depending on whether you have an Epi or a Gibby. Take that with a grain of salt because I don't have any first hand experience ( haven't pulled the trigger yet ). Link to comment Share on other sites More sharing options...
Members 's mel gibson Posted April 28, 2008 Members Share Posted April 28, 2008 You can get Switchcraft replacement pots with your choice of long or short shafts. Most upgrades include everything under the hood. Have you noticed dead spots on your volume and tone controls? Some lousy Asian pots have a "live Zone" from about 7:00 to 9:00 and you get no response anywhere else on the dial. That's a major reason for changing them. Measure the Epi's shaft and buy the Switchcraft replacement. It should fit or you can make it fit. Link to comment Share on other sites More sharing options...
Members StratoSlacker Posted April 28, 2008 Author Members Share Posted April 28, 2008 I wonder which are longer, Gibby or Epi? I'll have to do some Googling. Trying to determine if a set of pots that fit a Gibby LP will fit into an Epi LP. Link to comment Share on other sites More sharing options...
Members outtahear Posted April 28, 2008 Members Share Posted April 28, 2008 Pop one out-you'll see either a thin or thick top. Most imports use shorties...(Did an older Epiphone and a Vintage-brand LesPaul "Lemon Drop"last week- both used shorties). Oh yeah-the RS Superpots {censored}in' rule for vol pots-nice sweep, keep highs when you turn down, Measure near 550K. (Most generic CTS measure under 500K)Standard 500K pots are fine for tone controls. Link to comment Share on other sites More sharing options...
Members Alan Roberts Posted April 28, 2008 Members Share Posted April 28, 2008 The Gibson pots in a LP will be longer to compensate for the thicker top. They'll also be bigger in diameter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.