Members zoomzilla Posted July 31, 2008 Members Share Posted July 31, 2008 Ok, I am a bit confused here, and maybe it will not matter in the end, but here are two diagrams that have conflicting information. The first one shows this: Still, if you have a humbucker with 4 conductors, you might want to go all the way and wire it for all 3 of the tone options we have discussed. The best way to do this is with a special DPDT on/on/on switch (see Diagram D in the previous section). As you can see here the top two lugs are wired together. On the Seymour site only one lug is used, the other does not go anywhere. Here is the Seymour site. The wiring is almost exactly the same with the only difference being one lug is wired to another on the first site and the Seymour pic has it not used. Do you think the one lug difference will matter? Link to comment Share on other sites More sharing options...
Members headless Posted July 31, 2008 Members Share Posted July 31, 2008 The switches in the diagram at the top of your post are DPDT on-on-on switches. The switches in the Seymore Duncan diagram are DPDT on-on switches, that are mounted on a Push-Pull pot. They are electrically and mechanically different animals. Link to comment Share on other sites More sharing options...
Members zoomzilla Posted July 31, 2008 Author Members Share Posted July 31, 2008 Oh, that makes sense. So I will just go with the SD diagram then since I have DPDT switches on a pot. Link to comment Share on other sites More sharing options...
Members zoomzilla Posted August 1, 2008 Author Members Share Posted August 1, 2008 Boy these push pulls are a joy to wire! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.