Members ten56gibby Posted November 12, 2008 Members Share Posted November 12, 2008 Just curious. I'd love to put a good suppressor at the end of my FX loop. But I'm afraid it will cancel out the benefits I get from the compressor that first in the chain in front of the amp. Link to comment Share on other sites More sharing options...
Members Eddie Posted November 12, 2008 Members Share Posted November 12, 2008 You just need to adjust them properly, but there's no reason why you can't use both. In fact, my favorite compressor (Blackbox Oxygen) includes a noise suppressor. Link to comment Share on other sites More sharing options...
Members mrbrown49 Posted November 12, 2008 Members Share Posted November 12, 2008 Seems to me that you should get rid of noise before compressing your signal. Link to comment Share on other sites More sharing options...
Members PlectrumPete Posted November 12, 2008 Members Share Posted November 12, 2008 What benefit of the compressor would you be worried about a noise gate cancelling? Link to comment Share on other sites More sharing options...
Members ten56gibby Posted November 12, 2008 Author Members Share Posted November 12, 2008 I'm only compressing the signal from the guitar. Noise compiles in my effects chain before and after the preamp. I need something to get rid of that. My guitar isn't noisy. Some of my pedals are. Link to comment Share on other sites More sharing options...
Members Eddie Posted November 12, 2008 Members Share Posted November 12, 2008 And usually a compressor will bring up that noise that is already in the signal chain, so using a noise gate or suppressor is often a good idea.When I used a compressor other than the Oxygen, I used an ISP Decimator. I don't recall, but it was probably at the end of my chain. Link to comment Share on other sites More sharing options...
Members ten56gibby Posted November 12, 2008 Author Members Share Posted November 12, 2008 And usually a compressor will bring up that noise that is already in the signal chain, so using a noise gate or suppressor is often a good idea.When I used a compressor other than the Oxygen, I used an ISP Decimator. I don't recall, but it was probably at the end of my chain. My MXR Compressor is the first thing after my guitar. The compressor would be the last thing in my fx loop after the preamp. So this will give me the desired effect? Link to comment Share on other sites More sharing options...
Members stratitude Posted November 12, 2008 Members Share Posted November 12, 2008 I think all you need to do is make sure that the noise does not go into the compressor - this is what you want to avoid. It will amp up the noise and blend it with the guitar signal creating sonic mush. If the noise is being generated before the compressor, then use the suppressor to remove it before it gets to the compressor. If the noise is being generated after the compressor, then position the suppressor anywhere down the line after the source of the noise to remove it. Link to comment Share on other sites More sharing options...
Members Eddie Posted November 13, 2008 Members Share Posted November 13, 2008 My MXR Compressor is the first thing after my guitar. The compressor would be the last thing in my fx loop after the preamp. So this will give me the desired effect? Keep in mind that it also depends on your specific gear and how you set it up, but in theory using a gate at the end of the chain works, and in practice it has worked for me using different compressors and noise reduction units or noise gates (e.g., Boss NS-2, Rocktron Hush, ISP Decimator).Placement may have been different with the Boss, though. It's been years since I had one. I'm guessing you meant that the noise gate would be the last thing in your fx loop after the preamp. You can try it at the end of your chain, before the amp, or in the loop as you mention. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.