Members billybilly Posted February 12, 2013 Members Share Posted February 12, 2013 So, I gutted the pickups and wiring in my PRS SE and installled a 59 and Tone Zone both 4 conductor with push/pulls, 1 volume, 1 tone, 3 way switch. Everything works fine except my bridge doesn't split for some reason. I checked all the wiring again and it seems in check, albeit messy (lol). I used the following diagram and took into consideration the different colours Dimarzio uses for their pickups. Could the pot be fried? Should I switch a couple of wires? My pride wants me to make this work before taking it to my tech. http://cdn.seymourduncan.com/images/support/schematics/2h\_1v\_1t\_3w\_2pp.jpg Link to comment Share on other sites More sharing options...
Members gardo Posted February 12, 2013 Members Share Posted February 12, 2013 I'm no guru but I would say that the pot should be okay unless you overheated it solderingSwitching wires is what I would try because they can always be switched back again . Link to comment Share on other sites More sharing options...
Members elantric Posted February 12, 2013 Members Share Posted February 12, 2013 Looks like you have wired that up using Seymour Duncan pickup style Wiring - Review this link to see Dimarzio style wiring http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=color\_codes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.