Members Mazi Bee Posted September 16, 2005 Members Share Posted September 16, 2005 Does anyone know of a place that sells the CTS Stacked Concentric Pot, but with a long shaft for mounting in carved top LPs or other guitars with thick tops? Thanks Link to comment Share on other sites More sharing options...
Members misterhinkydink Posted September 16, 2005 Members Share Posted September 16, 2005 You might be looking for the wrong specifications. The threaded portion of the pot is called the bushing. The shaft is the part the knobs attach to. Link to comment Share on other sites More sharing options...
Members Mazi Bee Posted September 16, 2005 Author Members Share Posted September 16, 2005 Originally posted by misterhinkydink You might be looking for the wrong specifications. The threaded portion of the pot is called the bushing. The shaft is the part the knobs attach to. They still call them long shaft though, even though the threaded portion is the long part. Link to comment Share on other sites More sharing options...
Members _pete_ Posted September 16, 2005 Members Share Posted September 16, 2005 I haven't seen one anywhere.You may have to rout a little off the top from the inside of the cavity.I'll look around though. Link to comment Share on other sites More sharing options...
Members Mazi Bee Posted September 16, 2005 Author Members Share Posted September 16, 2005 Originally posted by pete n. I haven't seen one anywhere. You may have to rout a little off the top from the inside of the cavity. I'll look around though. Yeah, I might have to resort to that. It's for that floyd rose tele. the maple top is 1/2' thick, so normal pots don't even come close to fitting, even though the previous owner did some drilling out. So far I've looked at many places but no dice. Link to comment Share on other sites More sharing options...
Members _pete_ Posted September 16, 2005 Members Share Posted September 16, 2005 Take a look here:http://www.ctscorp.com/components/default.htm Go to the pdf on concentric pots. I think the part # you need is:270 T 8 20 R 501 A 2 A 1 Link to comment Share on other sites More sharing options...
Members Mazi Bee Posted September 16, 2005 Author Members Share Posted September 16, 2005 Originally posted by pete n. Take a look here:http://www.ctscorp.com/components/default.htmGo to the pdf on concentric pots. I think the part # you need is:270 T 8 20 R 501 A 2 A 1 Awesome, thanks Pete! I had no idea I could order direct from CTS. Link to comment Share on other sites More sharing options...
Members _pete_ Posted September 16, 2005 Members Share Posted September 16, 2005 I'm not sure if you can but it's worth a shot. I'm not positive on that part # but that does work out to be a 500K concentric with long shaft. I think???? Link to comment Share on other sites More sharing options...
Members is9582 Posted March 29, 2013 Members Share Posted March 29, 2013 I'm afraid it looks like that pot is only 500 ohms. I, too, am looking for the same as the OP. Dang it. Lee Should have mentioned it seems they're only available up to 100K ohms. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.