Members NeverIsAPromise Posted April 17, 2013 Members Share Posted April 17, 2013 Can you change it to a knob like on the old PRS guitars or a blade style switch? Link to comment Share on other sites More sharing options...
Members lz4005 Posted April 17, 2013 Members Share Posted April 17, 2013 NeverIsAPromise wrote: Can you change it to a knob like on the old PRS guitars or a blade style switch? Yes. Link to comment Share on other sites More sharing options...
Members bubkus_jones Posted April 17, 2013 Members Share Posted April 17, 2013 As long as you have the right hole for it, the right parts and the right wiring schematic, you can do whatever you want. Link to comment Share on other sites More sharing options...
Members kayd_mon Posted April 17, 2013 Members Share Posted April 17, 2013 If you also have a drill and reckless abandon, you can REALLY do anything! Link to comment Share on other sites More sharing options...
Members NeverIsAPromise Posted April 17, 2013 Author Members Share Posted April 17, 2013 Is it hard to do? Link to comment Share on other sites More sharing options...
Members kayd_mon Posted April 18, 2013 Members Share Posted April 18, 2013 Changing to a blade switch will require too much woodwork, so I'd pass on that idea. I don't know, but you might also have to route an LP a bit to fit a rotary switch in the cavity. If you're dealing with an SG or something similar, then maybe it'll be less complicated. It is possible, but it could be costly or difficult to pull off. You might be better served by gett push-pull pots instead. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.