Members Roger_Wolfe Posted March 11, 2018 Members Share Posted March 11, 2018 I have Boss RC-20 and want to be able to fade the loop in/out while maintaining my volume for the non-loop signal. In other words, I want a volume/expression pedal to be set up to do what the "level" knob on the RC-20 does, but I realize it's not exactly that easy. Advice on how to do this? Link to comment Share on other sites More sharing options...
Members Verne Andru Posted March 11, 2018 Members Share Posted March 11, 2018 If you want to control the volume from a pedal you'll need to put a volume pedal and some sort of mixer between the RC20 and your amp otherwise you will need a mixer which will let you control each signal independently. Probably need a switching pedal (Radial Big Shot?) so you can switch your guitar signal from going to the looper or to the mixer. The Infinity Looper has a jack for a volume pedal that controls the output but I've not tried it to see if this is just the looping output or the whole signal going through the looper. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.