Jump to content

New EHX Nano Looper 360 pedal


Phil O'Keefe

Recommended Posts

Well, you don't want to breathe that stuff - especially in an enclosed area where it concentrates. You should use a respirator, or at least a decent mask, and avoid breathing it as much as possible. Doing it outside is always an option, but you risk dust and contamination that way. Still, it can work if the wind and conditions are right and you're careful. The stuff dries to the touch pretty fast, and you can wipe it down with naphtha and / or a tack cloth between coats to keep the contaminants at bay. Once it's painted, you can move it into the garage to dry for a couple of weeks before wet sanding and buffing it out. That's the most difficult / time-consuming and laborious part, but it's really not all THAT bad. :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...