Members blindopher Posted July 17, 2014 Members Share Posted July 17, 2014 Hi,The electrolytic caps required are 47uF, but I can't seem to find any info about volt rating. The caps I've managed to locate so far (on Mojotone) are rated for hundreds of volts, physically large, obviously intended for tube amp use. Can anyone point me in the right direction? Link?thanx Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted July 17, 2014 Share Posted July 17, 2014 You don't need high voltage caps in a Rangemaster. http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dindustrial&field-keywords=47uF%20capacitor The 25V caps will work just fine in that circuit. Link to comment Share on other sites More sharing options...
Members jamitfx Posted August 5, 2014 Members Share Posted August 5, 2014 Just like Phil said. 25V is a great choice. If you plan to power your effect via a standard 9V power supply even a 16V cap would do. But a little reserve is always great. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.