Phil O'Keefe Posted May 19, 2008 Share Posted May 19, 2008 If you have a PRII, could you do me a big favor and take a look at the reverb tank and write down / post all the numbers that are stamped on the tank? My tank's been replaced, and I'm trying to determine what the stock tank was. Thanks! Link to comment Share on other sites More sharing options...
Members monkeyland Posted May 19, 2008 Members Share Posted May 19, 2008 obviously i know that the amps are different and may use different tanks but the tank from my concert II is an accutronics with 23572-0 stamped into one end Link to comment Share on other sites More sharing options...
Members jay3265E Posted May 19, 2008 Members Share Posted May 19, 2008 I had to replace mine was well. Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted May 19, 2008 Author Share Posted May 19, 2008 obviously i know that the amps are different and may use different tanks but the tank from my concert II is an accutronics with 23572-0 stamped into one end Thanks for checking. Is it a long tank (17" or so) or a short (9" or so) tank? Link to comment Share on other sites More sharing options...
Members monkeyland Posted May 19, 2008 Members Share Posted May 19, 2008 Thanks for checking. Is it a long tank (17" or so) or a short (9" or so) tank? long tank...and it's no problem. the tank is out of the amp right now Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted May 19, 2008 Author Share Posted May 19, 2008 I have a long tank in mine, but stock it was a short tank, so they're definitely different, but again, I do appreciate you checking on it for me - thanks. Link to comment Share on other sites More sharing options...
Members mrweems Posted May 19, 2008 Members Share Posted May 19, 2008 I wish i could be apart of this club. Link to comment Share on other sites More sharing options...
Members mrweems Posted May 19, 2008 Members Share Posted May 19, 2008 Link to comment Share on other sites More sharing options...
Members amp_surgeon Posted May 20, 2008 Members Share Posted May 20, 2008 Don't have a PRII, but I have a Princeton '65 with a short tank. Accutronics. Number stamped on top is 8EB2C1R. Numbers stamped on back are 028055 and 20 56 02. Link to comment Share on other sites More sharing options...
Members monkeyland Posted May 20, 2008 Members Share Posted May 20, 2008 I wish i could be apart of this club. well if you don't have one of those amps then you are apart of(from) this club:poke: Link to comment Share on other sites More sharing options...
Members mrweems Posted May 20, 2008 Members Share Posted May 20, 2008 well if you don't have one of those amps then you are apart of(from) this club:poke: I just have a regular SF Princeton 76' Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted May 20, 2008 Author Share Posted May 20, 2008 Don't have a PRII, but I have a Princeton '65 with a short tank. Accutronics. Number stamped on top is 8EB2C1R. Numbers stamped on back are 028055 and 20 56 02. And thanks for checking that too... but alas, I really need the numbers from a stock PRII tank - the impedance might be different on another amp... Link to comment Share on other sites More sharing options...
Members amp_surgeon Posted May 20, 2008 Members Share Posted May 20, 2008 And thanks for checking that too... but alas, I really need the numbers from a stock PRII tank - the impedance might be different on another amp... Fender part number was 018454. Check page 3: http://www.geocities.com/twoseriesfenders/priischematicwiringpartslist.pdf There's an entire site dedicated to that little fella! http://geocities.com/princerev2/ Link to comment Share on other sites More sharing options...
Members Demented Avenger Posted May 31, 2008 Members Share Posted May 31, 2008 I want one. if anyone is selling? Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted May 31, 2008 Author Share Posted May 31, 2008 Fender part number was 018454. Check page 3: http://www.geocities.com/twoseriesfenders/priischematicwiringpartslist.pdf There's an entire site dedicated to that little fella! http://geocities.com/princerev2/ Thanks for the info. I was already familiar with the PRII site (my personal PRII is the single "Batch F" amp that is listed there), and I already knew the Fender part number, but what I'm hoping to find is the actual numbers that are stamped on the tank itself - that will tell me various things about the tank - impedance, etc. BTW, I couldn't get into the first site you linked to - maybe they've exceeded their bandwidth limitations. I'll try again later. Thanks again for your help though. Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted August 29, 2017 Author Share Posted August 29, 2017 Bumping an old thread to add some information - for future reference, this site (tubeampdoctor.com) says that the original tank was a 8AB3C1B. The information is indeed also up in the PRII site, in the FAQ sectionL http://www.stratopastor.org.uk/strato/amps/prii/faq/faq.html Apparently it's the same tank as the one used in the Super Champ - which is nice for me since I can just pop the one out of my SC and try it in my PRII to directly compare the short and long tanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.