Members arcadesonfire Posted January 17, 2013 Members Share Posted January 17, 2013 Agh! I had asked this question a few days ago, and I saw briefly yesterday an explanation about what to snip to make it so that the wet output on my Micro POG goes completely mute when i disengage the pedal. I was planning on using that post and doing it today. But now I can't find the thread! Can anyone help me, again. The Micro POG has a wet output and a dry output, but when it's disengaged, the wet output switches over to just sending out the dry output. I want to be able to run out from just the wet output and have this signal chain completely muted when i kick the pedal off. I've been able to do this with a boss OC-3 by running out from the wet and plugging in a dummy cable to the dry output, but Micro POG won't work like that. What can I do??Thanks (again!) Link to comment Share on other sites More sharing options...
Members k tone Posted January 17, 2013 Members Share Posted January 17, 2013 Are you allowed to have "wet' in the title? Link to comment Share on other sites More sharing options...
Members PKTrono Posted January 17, 2013 Members Share Posted January 17, 2013 you'd probably be better off just building a small mute pedal and putting it right after the wet output of the pog. then you just use that as the bypass switch Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.