Members vickno Posted February 14, 2013 Members Share Posted February 14, 2013 I want this pedal looper to control the amp channels and reverb, too. http://www.thomann.de/gb/harley_benton_fxl8.htmWould it be possible to mod it ? If it's too complicated and/or expensive I'd better buy this:http://www.thomann.de/gb/carl_martin_oc ... h_mkii.htm Link to comment Share on other sites More sharing options...
Members lefort_1 Posted February 14, 2013 Members Share Posted February 14, 2013 Historically, channelswitcher and reverb controls have been 'pull-to-ground'-type or dpdt switches.Those two loopers appear to be buffered send/rcv types. It would be a huge waste to ask a buffer to slam a line to ground to activate reverb. Even more of a waste to pull out the active/programmable buffers and toss in dead-switches.If it were me, I'd get the simpler looper and just buy a small, simple switcher/reverb box and have it on the side. They can be tiny. Link to comment Share on other sites More sharing options...
Members vickno Posted February 14, 2013 Author Members Share Posted February 14, 2013 Excuse my ignorance, but would it be possible "to ask a buffer to slam a line to ground to activate reverb" ? All I care is if the mod is possible and cheap. I don't need the whole 8 loops, 6 would be enough. I need to be able to make and save patches such as:1. clean channel + amp reverb + chorus2.gain channel + OD + noise gate + delay Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.