Members reverberlayed Posted March 2, 2013 Members Share Posted March 2, 2013 I've reached the capacity of my Dunlop Power Brick so I'm looking to upgrade. I'm going to need a power supply capable of powering 10-12 pedals including 9v, 18v, and weird inputs like EHX and a Rat. Is there 1 power supply that can handle all of these or should I look for 2 supplies? Link to comment Share on other sites More sharing options...
Members Pedaltones Posted March 2, 2013 Members Share Posted March 2, 2013 Voodoo lab Mondo or Ciokolate. Both expensive but will do what you ask easily.Then there's the CAE 403 which is slightly cheaper which would get you there.Or a voodoo lab PP2+ - voltage doubler cable for 2 ouputs to give you 18v, and a couple of daisy chains off a couple of other outputs for a few of your analog pedals.(remember to add the current draws off each pedal on the chain not to exceed each outputs capabilty. Link to comment Share on other sites More sharing options...
Members reverberlayed Posted March 3, 2013 Author Members Share Posted March 3, 2013 Wow, those are expensive. Maybe I'll get a PP2 and use my power brick for the others. Hmm any other ideas? Link to comment Share on other sites More sharing options...
Members killthehippies45 Posted March 4, 2013 Members Share Posted March 4, 2013 pedalshark.comi think is the Cioks DC-10, i'm using one for pretty much the same things you are.email the guy, Brian, i think, he was super helpful when i had lots of questions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.