Jump to content

PEAVEY WINDSOR in JMP 2203 clothes...


cliffenstein

Recommended Posts

  • Members

I got this back from Mather Cabs today (http://www.mathercab.com)...they did a wonderful job!

 

Front, no logo:

32193722191_1b7399ce0c_o.jpg

 

The Peavey backpanel design was a better fit for the chassis.

32193722121_8fc91a7622_o.jpg

 

Hey...let's put a logo on there! (Logo by Mojotone - http://www.mojotone.com.)

32193722071_24c475dd1b_o.jpg

 

So how's it look on the cab?

32193722041_26483bab98_o.jpg

 

Since this new headshell is made of pine instead of MDF, the amp weighs less now.

Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...
  • Members

My Windsor's faceplate was in pretty bad shape so I decided to see about getting a new one. I contacted John over at Mojotone to discuss it. He had previously made me a great looking Windsor logo for my JMP 2203 inspired headshell (courtesy of Mather Cabs), so I was confident it would look good.

 

John made me a new faceplate that is every bit as 2203 inspired as the headshell. It's freaking perfect! He used my initials (JCW) in place of the JMP text. The fonts and other text changes are perfect. I really dig the renumbering of the knobs back to 1-10 (verses 1-12 on the stock Windsor plate). John did a spectacular job and I'm super pleased with how this turned out.

 

32972301031_6c3a3e99b3_o.jpg

 

32972301111_1aa91c5b77_o.jpg

 

32943089172_43172c104c_o.jpg

 

32943089212_154d9d3b6a_o.jpg

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...