Members Sambora#2 Posted August 25, 2005 Members Share Posted August 25, 2005 I would love to make the VPR button available as a footswitchable option. Anyone know how to do this (or anyone in the UK who could do it for me?)? Thanks in advance. Link to comment Share on other sites More sharing options...
Members PGS412 Posted August 25, 2005 Members Share Posted August 25, 2005 Serious? i never thought i'd want to switch the VPR during a song! I have no idea how to do it so heres a bump Link to comment Share on other sites More sharing options...
Members Sambora#2 Posted August 25, 2005 Author Members Share Posted August 25, 2005 I'm deadly serious. I would use it like a solo boost, keep it on most of the time and when the time comes, turn it off and voila 120watts for the solo! Link to comment Share on other sites More sharing options...
Members 67frankie Posted August 25, 2005 Members Share Posted August 25, 2005 Hi,I have a tsl Take a dummy jack and plug it into effects loop and push in the send button and adjust your mix settings louder than your volume.NOW you have lead boost for all 3 channels when you hit the effects button on your 5 ch pedal.This will not work if you are allready using the loop.It says how to do it in the tsl manual LOOK CLOSELY its in there.(manual) Link to comment Share on other sites More sharing options...
Members Sambora#2 Posted August 25, 2005 Author Members Share Posted August 25, 2005 Bummer, I use the effects loop, doesn't work for me. Thanks for the reply anyhow! Much appreciated. Link to comment Share on other sites More sharing options...
Members kannibul Posted August 25, 2005 Members Share Posted August 25, 2005 Do what I did... Put an EQ Pedal in your loop, and just set it for a slight boost. Worked like a champ. Link to comment Share on other sites More sharing options...
Members Sambora#2 Posted August 26, 2005 Author Members Share Posted August 26, 2005 Sounds like a good idea. I'll hop over to the effects forum and find out about a good eq. Link to comment Share on other sites More sharing options...
Members jlambert85 Posted September 13, 2005 Members Share Posted September 13, 2005 I use the fx loop with a dummy jack, but as u use it for fx I think any of the below are easier and probably better options than the VPR idea. eq boost, Dist box with gain down and level up - tubescreamer, sd1, Carl Martin Boost & Kick, Signal booster - seymour duncan pickup booster Link to comment Share on other sites More sharing options...
Members Voodoo Amps Posted September 13, 2005 Members Share Posted September 13, 2005 I'm deadly serious. I would use it like a solo boost, keep it on most of the time and when the time comes, turn it off and voila 120watts for the solo! In order to have the solo where you want it in the mix (which varies from room to room) you will need some sort of Level or Master control for the solo. You can do it without one but we get calls every couple days from players who have a fixed solo boost that want a Level control installed. In my opinion a solo boost is not worth the while unless you have a way to adjust it, otherwise you are stuck with where ever the boost is fixed to (IE: could be too loud or not loud enough). Put an EQ Pedal in your loop, and just set it for a slight boost. That's what a lot of guys do and it's adjustable, which is pretty much as must. For what it's worth;Trace Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.