Members escapethefate Posted December 29, 2007 Members Share Posted December 29, 2007 Hey guys, I'm looking to get a good amp for mainly bedroom practice and maybe the ocassional low wattage gig. I have narrowed it down between a Peavey Classic 30 and a Fender Deluxe Reverb Reissue (used). I'm interested in having the best tone with a ton of sustain and good versatility as I like to play a wide variety of music. Which would be best for me? Link to comment Share on other sites More sharing options...
Members metalfanat1c Posted December 29, 2007 Members Share Posted December 29, 2007 Well, a DRRI isn't exactly versatile, unless you're talking variety of clean sounds... I'd recommend the C30 for versatility, the DRRI for tonal quality. Link to comment Share on other sites More sharing options...
Members jhall Posted December 29, 2007 Members Share Posted December 29, 2007 Well, a DRRI isn't exactly versatile, unless you're talking variety of clean sounds...I'd recommend the C30 for versatility, the DRRI for tonal quality. Though I'm in love with my DRRI, I'd say to go with the Peavey.My DRRI will give you some good breakup but will be very loud at that point.The Peavey has a very usable master volume. Link to comment Share on other sites More sharing options...
Members Rich Posted December 29, 2007 Members Share Posted December 29, 2007 DRRIand a TS9 pedal. Link to comment Share on other sites More sharing options...
Members Ramblin390 Posted December 29, 2007 Members Share Posted December 29, 2007 The peavey has no master volume-but vote goes to the c-30 Link to comment Share on other sites More sharing options...
Members Fxrs Posted December 29, 2007 Members Share Posted December 29, 2007 The peavey has no master volume-but vote goes to the c-30 Pre and post= master volume. Link to comment Share on other sites More sharing options...
Members Snax Panther Posted December 29, 2007 Members Share Posted December 29, 2007 DRRIand a TS9 pedal. This is a smart man. Listen to him. Get a good DRRI, a TS-9, and a decent delay pedal... you'll be set. :love: Link to comment Share on other sites More sharing options...
Members SLfreak Posted December 29, 2007 Members Share Posted December 29, 2007 I'd say the Peavey as well. I love the DRRI, it's high on my list of amps to own, but I think the Peavey has a bit of a leg up in terms of versatility. Link to comment Share on other sites More sharing options...
Members Ramblin390 Posted December 29, 2007 Members Share Posted December 29, 2007 Pre and post= master volume. pre and post=pre and postnormal channel volume=normal channel volume Link to comment Share on other sites More sharing options...
Members PurpleStain Posted December 29, 2007 Members Share Posted December 29, 2007 pre and post=pre and postnormal channel volume=normal channel volume a post volume *is* essentially a master volume. You're able to get distortion at reasonable volume levels. Link to comment Share on other sites More sharing options...
Members Brick Posted December 29, 2007 Members Share Posted December 29, 2007 c 30 by a mile, the fender will be loud as {censored} when it gets to break up, hit the peavey Link to comment Share on other sites More sharing options...
Members escapethefate Posted December 30, 2007 Author Members Share Posted December 30, 2007 looks like most prefer the c30 in terms of versatility...any suggestions for alternatives to the c30 or is it the best in it's class? Also, if i were to get the DDRRI but use a few pedals to get distortion...would the c30 still be a better bet? thanks for the help guys...I have a wad of xmas cash burning a hole in my pocket! Link to comment Share on other sites More sharing options...
Members Ramblin390 Posted December 30, 2007 Members Share Posted December 30, 2007 a post volume *is* essentially a master volume. You're able to get distortion at reasonable volume levels. a master volume is a master volume for both channels, pv post controls only the gain channel, yes as you turn the post up the gain channel gets louder, but the tone also changes along with it. Link to comment Share on other sites More sharing options...
Members Rich Posted December 30, 2007 Members Share Posted December 30, 2007 I'd sit on a DRRI with dead tubes playing my guitar silently before I'd be caught with a peavey. Link to comment Share on other sites More sharing options...
Members PurpleStain Posted December 30, 2007 Members Share Posted December 30, 2007 I'd sit on a DRRI with dead tubes playing my guitar silently before I'd be caught with a peavey. tha'ts just silly. I've owned fenders, voxen, marshalls, and I put the tone of the classic series peaveys right up there with them. If you're just ashamed of the nameplate, that's even more silly. Link to comment Share on other sites More sharing options...
Members PurpleStain Posted December 30, 2007 Members Share Posted December 30, 2007 a master volume is a master volume for both channels, pv post controls only the gain channel, yes as you turn the post up the gain channel gets louder, but the tone also changes along with it. the tone changes with the raising of a truly labeled "master volume" as well. In functionality, I notice no difference. Link to comment Share on other sites More sharing options...
Members SLfreak Posted December 30, 2007 Members Share Posted December 30, 2007 looks like most prefer the c30 in terms of versatility...any suggestions for alternatives to the c30 or is it the best in it's class?Also, if i were to get the DDRRI but use a few pedals to get distortion...would the c30 still be a better bet?thanks for the help guys...I have a wad of xmas cash burning a hole in my pocket! I also like the Traynor amps, but I haven't played any of their recent models, just the YCV40. Link to comment Share on other sites More sharing options...
Members Ramblin390 Posted December 30, 2007 Members Share Posted December 30, 2007 the tone changes with the raising of a truly labeled "master volume" as well. In functionality, I notice no difference. master volume is a volume control on both channels-the c-30 doesn't have a master volume, and the tonal change is dramatic on the c-30 when you crank the post. Link to comment Share on other sites More sharing options...
Members metalfanat1c Posted December 30, 2007 Members Share Posted December 30, 2007 looks like most prefer the c30 in terms of versatility...any suggestions for alternatives to the c30 or is it the best in it's class? Also, if i were to get the DDRRI but use a few pedals to get distortion...would the c30 still be a better bet? thanks for the help guys...I have a wad of xmas cash burning a hole in my pocket! The DRRI with good distortion pedals would be a better bet. The distortion on the C30 would still be better, but you'll have more tones with the DRRI and one of the best clean tones on the planet. Link to comment Share on other sites More sharing options...
Members gdwill2u Posted December 30, 2007 Members Share Posted December 30, 2007 I've owned both and I still own the DRRI. The C30 has better distortion but you can equal this with a good pedal (I use an OCD), but the clean side of the DRRi blows away the C30 IMO. For a real versatile amp with a dynamite clean channel try the Mesa F-50, this is my other amp so I am admittedly biased. Link to comment Share on other sites More sharing options...
Members Herald of Light Posted December 30, 2007 Members Share Posted December 30, 2007 pre and post=pre and postnormal channel volume=normal channel volume That's disputing semantics in a pretty misleading manner. The entire point of a master volume is to attenuate the signal after the preamp is overdriven. It's not to control the level of each channel unless it's a GLOBAL master volume. I've never once heard someone call that design a "post" volume in my entire life. The knob itself may be labeled "post" by Peavey, but the whole point is that the channel has a master volume circuit. Everyone universally refers to single channel Marshalls as either having a master volume, or as non-master volume. In the case of it having a master volume, there aren't multiple channels to begin with, but it's the exact same thing as the distortion channel on a Classic 30. In the case of it being NMV, it may still only have one main volume control, yet it's stated to NOT have a master volume, ONLY for the fact that there isn't a way to attenuate the signal after the preamp so that it can be overdriven by itself. So by that logic: distortion channel = master volume circuitnormal channel = NMV circuit Regardless, I don't see why that'd even matter if an amp doesn't have a global volume control. That's almost completely pointless, hence most amps not having it. Link to comment Share on other sites More sharing options...
Members PurpleStain Posted December 30, 2007 Members Share Posted December 30, 2007 That's disputing semantics in a pretty misleading manner.The entire point of a master volume is to attenuate the signal after the preamp is overdriven. It's not to control the level of each channel unless it's a GLOBAL master volume. I've never once heard someone call that design a "post" volume in my entire life.Everyone universally refers to single channel Marshalls as having a master volume or NMV. That may control the overall level of the amp, since there aren't multiple channels to begin with, but it's the exact same thing as the distortion channel on a Classic 30.Regardless, I don't see why that'd even matter if an amp doesn't a global volume control. That's almost completely pointless, hence most amps not having it. +1 Link to comment Share on other sites More sharing options...
Members Ramblin390 Posted December 30, 2007 Members Share Posted December 30, 2007 +1 -1If the c30 had a master volume, you could crank the clean channel to 6 and get that sweet breakup and use a master to lower the overall volume so your not rattling the windows. Link to comment Share on other sites More sharing options...
Members PurpleStain Posted December 30, 2007 Members Share Posted December 30, 2007 -1If the c30 had a master volume, you could crank the clean channel to 6 and get that sweet breakup and use a master to lower the overall volume so your not rattling the windows. You can't do that with any amplifier. Once you turn the global master volume down that sweet breakup goes away. If the power tubes aren't made to work, then there's no way that sweet breakup is going to happen unless you turn up the preamp volume. The only way to get what you're talking about is with an attenuator. Link to comment Share on other sites More sharing options...
Members Say Ocean Posted December 30, 2007 Members Share Posted December 30, 2007 The DRRI takes pedals reallly well. But if you don't have/want to spend a bunch on pedals, the classic 30. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.