Announcement
Collapse
No announcement yet.

Higain kemper clip.

Collapse



X
  • Time
  • Show
Clear All
new posts

  • #16






    Quote Originally Posted by Chris.novak
    View Post

    Another question, have you used modellers to record before? If so how do you find adding post eq reacts with the kemper compared to modellers? I always found modellers to react badly to eq where a mic'd up amp reacted just as you would want too.




    From my experience you need to use post eq differently with the Kemper than how you would treat tube amp tracks to get the same results. You can get the same end result, you just need to approach it a bit differently, ie. not cut as much low end and not boost the highs/presence as much. If you boost the presence like you'd with a tube amp track it can get pretty piercing and thin fast. My 2c
    | Destination : Destruction | Kalmanväki | Luujauho | Clips | Youtube | Gear |

    Comment


    • #17






      Quote Originally Posted by Chris.novak
      View Post

      Another question, have you used modellers to record before? If so how do you find adding post eq reacts with the kemper compared to modellers? I always found modellers to react badly to eq where a mic'd up amp reacted just as you would want too.




      From my experience you need to use post eq differently with the Kemper than how you would treat tube amp tracks to get the same results. You can get the same end result, you just need to approach it a bit differently, ie. not cut as much low end and not boost the highs/presence as much. If you boost the presence like you'd with a tube amp track it can get pretty piercing and thin fast. My 2c
      | Destination : Destruction | Kalmanväki | Luujauho | Clips | Youtube | Gear |

      Comment


      • #18






        Quote Originally Posted by Chris.novak
        View Post

        I had a go on a kemper at a london music store. I went through the factory profiles which I thought were amazing compared to my old hd500(I know a lot say the factory profiles are rubbish). But I realised they had me playing through
        amps
        Engl fireball
        ht-20 combo
        blackstar HT-5
        Peavey Classic 50H
        Baez 100 something
        cabs
        engl slant (V30 one)
        marshall 1960a
        classic 4x12 tweed
        E-tone 1x12
        Baez 4x12
        guitars
        Shecter Blackjack 08
        Schecter Classic Blue
        Schecter Elite vintage white
        LTD M-302 natural finish
        my vids of shred
        http://www.youtube.com/user/gtjumper

        Comment


        • #19






          Quote Originally Posted by Chris.novak
          View Post

          I had a go on a kemper at a london music store. I went through the factory profiles which I thought were amazing compared to my old hd500(I know a lot say the factory profiles are rubbish). But I realised they had me playing through
          amps
          Engl fireball
          ht-20 combo
          blackstar HT-5
          Peavey Classic 50H
          Baez 100 something
          cabs
          engl slant (V30 one)
          marshall 1960a
          classic 4x12 tweed
          E-tone 1x12
          Baez 4x12
          guitars
          Shecter Blackjack 08
          Schecter Classic Blue
          Schecter Elite vintage white
          LTD M-302 natural finish
          my vids of shred
          http://www.youtube.com/user/gtjumper

          Comment


          • #20






            Quote Originally Posted by Chris.novak
            View Post

            I had a go on a kemper at a london music store. I went through the factory profiles which I thought were amazing compared to my old hd500(I know a lot say the factory profiles are rubbish). But I realised they had me playing through
            amps
            Engl fireball
            ht-20 combo
            blackstar HT-5
            Peavey Classic 50H
            Baez 100 something
            cabs
            engl slant (V30 one)
            marshall 1960a
            classic 4x12 tweed
            E-tone 1x12
            Baez 4x12
            guitars
            Shecter Blackjack 08
            Schecter Classic Blue
            Schecter Elite vintage white
            LTD M-302 natural finish
            my vids of shred
            http://www.youtube.com/user/gtjumper

            Comment


            • #21






              Quote Originally Posted by Chris.novak
              View Post

              I had a go on a kemper at a london music store. I went through the factory profiles which I thought were amazing compared to my old hd500(I know a lot say the factory profiles are rubbish). But I realised they had me playing through
              amps
              Engl fireball
              ht-20 combo
              blackstar HT-5
              Peavey Classic 50H
              Baez 100 something
              cabs
              engl slant (V30 one)
              marshall 1960a
              classic 4x12 tweed
              E-tone 1x12
              Baez 4x12
              guitars
              Shecter Blackjack 08
              Schecter Classic Blue
              Schecter Elite vintage white
              LTD M-302 natural finish
              my vids of shred
              http://www.youtube.com/user/gtjumper

              Comment


              • #22






                Quote Originally Posted by nakedzen
                View Post

                From my experience you need to use post eq differently with the Kemper than how you would treat tube amp tracks to get the same results. You can get the same end result, you just need to approach it a bit differently, ie. not cut as much low end and not boost the highs/presence as much. If you boost the presence like you'd with a tube amp track it can get pretty piercing and thin fast. My 2c




                I find it gets shrill very fast too. Usually i always boost 5000hz and up but the kemper need half of what i would normally do, even with my own profiles.
                amps
                Engl fireball
                ht-20 combo
                blackstar HT-5
                Peavey Classic 50H
                Baez 100 something
                cabs
                engl slant (V30 one)
                marshall 1960a
                classic 4x12 tweed
                E-tone 1x12
                Baez 4x12
                guitars
                Shecter Blackjack 08
                Schecter Classic Blue
                Schecter Elite vintage white
                LTD M-302 natural finish
                my vids of shred
                http://www.youtube.com/user/gtjumper

                Comment


                • #23






                  Quote Originally Posted by nakedzen
                  View Post

                  From my experience you need to use post eq differently with the Kemper than how you would treat tube amp tracks to get the same results. You can get the same end result, you just need to approach it a bit differently, ie. not cut as much low end and not boost the highs/presence as much. If you boost the presence like you'd with a tube amp track it can get pretty piercing and thin fast. My 2c




                  I find it gets shrill very fast too. Usually i always boost 5000hz and up but the kemper need half of what i would normally do, even with my own profiles.
                  amps
                  Engl fireball
                  ht-20 combo
                  blackstar HT-5
                  Peavey Classic 50H
                  Baez 100 something
                  cabs
                  engl slant (V30 one)
                  marshall 1960a
                  classic 4x12 tweed
                  E-tone 1x12
                  Baez 4x12
                  guitars
                  Shecter Blackjack 08
                  Schecter Classic Blue
                  Schecter Elite vintage white
                  LTD M-302 natural finish
                  my vids of shred
                  http://www.youtube.com/user/gtjumper

                  Comment


                  • #24
                    I generally go hard with the high and low cut leaving loads of room for bass guitar and drums and highs for the vocals.



                    I found with modellers that high and low cut ended me with a horrible fuzz mess that still remained strong in a mix. Couldn't stand it.

                    Comment


                    • #25
                      I generally go hard with the high and low cut leaving loads of room for bass guitar and drums and highs for the vocals.



                      I found with modellers that high and low cut ended me with a horrible fuzz mess that still remained strong in a mix. Couldn't stand it.

                      Comment


                      • #26
                        Btw I'm not a pro obviously. I just do things that sound good to my ears.



                        I thought most of the stock profiles were great. They sounded and felt like real amps. Cannot wait to try the better profiles though!

                        Comment


                        • #27
                          Btw I'm not a pro obviously. I just do things that sound good to my ears.



                          I thought most of the stock profiles were great. They sounded and felt like real amps. Cannot wait to try the better profiles though!

                          Comment


                          • #28






                            Quote Originally Posted by Chris.novak
                            View Post

                            I generally go hard with the high and low cut leaving loads of room for bass guitar and drums and highs for the vocals.



                            I found with modellers that high and low cut ended me with a horrible fuzz mess that still remained strong in a mix. Couldn't stand it.




                            If you profile your own or find some out of the plethora out there, you will get along with it just fine. there are some very modeller sounding profiles and i question there origin, but i guess thats is just another option this thing has
                            amps
                            Engl fireball
                            ht-20 combo
                            blackstar HT-5
                            Peavey Classic 50H
                            Baez 100 something
                            cabs
                            engl slant (V30 one)
                            marshall 1960a
                            classic 4x12 tweed
                            E-tone 1x12
                            Baez 4x12
                            guitars
                            Shecter Blackjack 08
                            Schecter Classic Blue
                            Schecter Elite vintage white
                            LTD M-302 natural finish
                            my vids of shred
                            http://www.youtube.com/user/gtjumper

                            Comment


                            • #29






                              Quote Originally Posted by Chris.novak
                              View Post

                              I generally go hard with the high and low cut leaving loads of room for bass guitar and drums and highs for the vocals.



                              I found with modellers that high and low cut ended me with a horrible fuzz mess that still remained strong in a mix. Couldn't stand it.




                              If you profile your own or find some out of the plethora out there, you will get along with it just fine. there are some very modeller sounding profiles and i question there origin, but i guess thats is just another option this thing has
                              amps
                              Engl fireball
                              ht-20 combo
                              blackstar HT-5
                              Peavey Classic 50H
                              Baez 100 something
                              cabs
                              engl slant (V30 one)
                              marshall 1960a
                              classic 4x12 tweed
                              E-tone 1x12
                              Baez 4x12
                              guitars
                              Shecter Blackjack 08
                              Schecter Classic Blue
                              Schecter Elite vintage white
                              LTD M-302 natural finish
                              my vids of shred
                              http://www.youtube.com/user/gtjumper

                              Comment


                              • #30
                                Sounds excellent man, clear tight and cutting. Good job.
                                "is this tone obtainable using the HD500 or Axe Fx? Overall, for convenience and volume control, should I buy the Axe Fx over actual tube amps? I don't plan on playing loud; just playing at home and recording on my Mac. Thanks man, you are awesome!


                                short answer: no...

                                long answer: no way..."

                                Comment













                                Working...
                                X