Members FooEverlong12 Posted January 24, 2007 Members Share Posted January 24, 2007 I just got one of these on ebay, and the thing looks perfect. What I'm wondering (from anyone else who has one) is if anyone else gets a good amount of noise from their amp without anything plugged into the amp. It's a late British model with greenback speakers, and I can have nothing plugged in, or my guitar, turned up or down, and when I touch the volume on the amp, it buzzes. Is this normal?I appreciate responses.thanks!-Jon Link to comment Share on other sites More sharing options...
Members FooEverlong12 Posted January 25, 2007 Author Members Share Posted January 25, 2007 Uh, can anyone help me out? It seems like the brilliant channel is buzzing more than anything else, and there's a light hum with all of the controls turned down, but it amplifies a lot when i plug into the brilliant channel.anyone? Link to comment Share on other sites More sharing options...
Members Negative K3 fan Posted January 25, 2007 Members Share Posted January 25, 2007 i had one like that myself... it was quite noisy, but i cant say from your description if the amount of noise you're getting is excessive. Link to comment Share on other sites More sharing options...
Members FooEverlong12 Posted January 25, 2007 Author Members Share Posted January 25, 2007 Anyone else? Link to comment Share on other sites More sharing options...
Members Atlantis_01 Posted July 13, 2013 Members Share Posted July 13, 2013 Hi,Had the same problem with an AC30.One of the EL84 had a failure.Replaced all 4(you should change all 4 because they should match.After replacing them problem was solved Link to comment Share on other sites More sharing options...
Members ijams Posted July 15, 2013 Members Share Posted July 15, 2013 Filter capacitor could be weak,.Wiggle the tube buy tube then try swapping preamp tubes.Unplug all effects loop chords if any and this what i would try, and plug the 120v cord into a cpu power regulated power sockett.The input jack my be the switching type and be dirty on the contact,i think its just a spring steel contact problem ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.