Members macrossgeorge Posted March 2, 2013 Members Share Posted March 2, 2013 First post here. I have two effects processors (TC Electronic Fireworx and Roland GP-100) and only one midi pedal (Roland FC-200). Is it possible to have the one midi pedal send preset changes to both of the processors? Maybe somehow one at a time? I would like to be able to change patches on the TC Electronic, play some stuff then change presets on the Roland.I have an A/B box in place already so that I can send my guitar to one and then the other and that already is great but I want to be able to change patches without having to get a second pedal. I am a bit of a beginner when it comes to midi set up, settings, etc. Does anyone have a solution? Thank you Link to comment Share on other sites More sharing options...
Members TieDyedDevil Posted March 4, 2013 Members Share Posted March 4, 2013 I don't believe that the FC-200 can send independent messages on two different MIDI channels, which is what you'd need to do. If you can swap the FC-200 for an FC-300, the latter has a "patch mode" that can be programmed to do what you said you want to do. Link to comment Share on other sites More sharing options...
Members macrossgeorge Posted March 8, 2013 Author Members Share Posted March 8, 2013 Thank you! I will look into getting an FC-300. Cheers! Link to comment Share on other sites More sharing options...
Members scottkahn Posted June 9, 2013 Members Share Posted June 9, 2013 The FC-200 sends only a single PC message at a time, so what you could do is have both processors set to the same MIDI channel, have the FC-200 connect to the MIDI IN of the first processor, then connect a cable from the MIDI Thru of that processor to the MIDI In of the second processor.In this setup, your FC-200 will send the same preset change message to both devices. You could just program certain patches that get called up to be muted/bypasses/etc. if you only want to use one processor at a time.For discrete control of each device, the hookup is the same, but a more advanced MIDI foot controller could send PC messages to each processor independently on their own MIDI channels. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.