Members Task Posted January 14, 2014 Members Share Posted January 14, 2014 I have a Digitech GSP1101 and Control 2 combo that I am using, and I am using an external expression pedal (Ernie Ball VPJR) for volume only and the Control 2's internal expression pedal for other functions. Problem is my external pedal does most of its volume in the first 30 percent of the pedal sweep. I Link to comment Share on other sites More sharing options...
Members BlueGreene Posted January 23, 2014 Members Share Posted January 23, 2014 Do take a look at the manual to see if you need to perform some sort of calibration. Link to comment Share on other sites More sharing options...
Members Task Posted February 7, 2014 Author Members Share Posted February 7, 2014 I found the solution!After some surfing I found a post somewhere that said to switch the leads to the potentiometer inside the pedal. Instead of that I took the cable running from the expression pedal to the control 2 and on one end switched the polarity of the plug. It works fine now, and you can use the EB volume pedal for other things. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.