Members gillibi Posted March 4, 2011 Members Share Posted March 4, 2011 Putting together a rig and was wondering if there would be any signal problems running two seperate effect boxes(Yamaha GEP50 and Line6 DL4) through a single stereo aux return? I know I'd be limited to only be able to adjust the mix of both boxes with the mixer knob but can deal with that. Please let me know, thanks!!! Link to comment Share on other sites More sharing options...
Members abitofinger Posted March 6, 2011 Members Share Posted March 6, 2011 I run an Alesis 3630 Compressor into an Aphex Aural Exciter from aux sends 1 & 2 and back into aux return 3 to blend the compressed excited signal into the main mix and I have no problems with it it sounds great! Link to comment Share on other sites More sharing options...
Members WRGKMC Posted April 12, 2011 Members Share Posted April 12, 2011 Its not ideal but it usually works. you may find the yamaha a bit noisy running through there. I have the same units and its pretty old technology. its OK in a guitar rack or for recording but doesnt sound all that great on a live mixer. you also must be sure you pan the effects in the unit to 100% so you dont get a feedback using it in an effects loop. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.