Harmony Central Forums
Announcement Announcement Module


Harmony Central has “soft launched” our new mobile experience this past week. While we have done extensive testing, we know that with a community as large as HC that there will be items that surface that will still need to be addressed. We are asking that you utilize the thread belowto report any challenges you may encounter. Here are the things we request you provide: A brief description of the issue, the device and operating system version you were using, the browser and version, screen resolution, and a screen shot of the display.
Thanks for your patience as we work towards the best experience we can provide to our community.

See more
See less

Using the HD Pro Live and how to get real Amp tones that are not overly processed

Page Title Module
Move Remove Collapse

Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using the HD Pro Live and how to get real Amp tones that are not overly processed

    I used this last night at a gig and it sounded horrible to me......

    Set up HD Pro into and Peavey IPR3000 Power Amp into a Mesa 2 X 12...........coming out of the HD Pro unbalanced left and right outputs into the a and b channel of the peavey into the Mesa.....also have the shot board foot pedal........as far as patches I just used the stock patches......should the cabs and mics be turned off?


  • #2
    The stock presets are kind of lame IMO so to get the best tones start from scratch.

    Also the stock presets do indeed all have full amp/cabinet emulation and are not going to sound all that great through that setup.

    I would build patches from scratch using just preamp models and making sure the can and mic emulation is off. Not sure if it should be set fit amp or line level output.


    • #3
      Ok, after taking a quick peak at the power amp you have you can probably leave amp emulation on too but definitly turn off cabinet emulation.