Members djiceman1575 Posted April 11, 2013 Members Share Posted April 11, 2013 Been debating about a light rig of 16 Puck Fab5 used in conjunction with 4 ADJ XMove LED 25R's for a basic band and sound rig. Are the 25W CREE LED's in the XMove's going to be enough to cut through the Fab5's? I won't be using all 16 except for larger shows, but budget is tight, as always... Link to comment Share on other sites More sharing options...
Members StratGuy22 Posted April 11, 2013 Members Share Posted April 11, 2013 Nice mang!! I have a similar setup. With 11 3NX on the truss, 4 movers and 4 Fab5's on the band. Not sure about the XMove. Link to comment Share on other sites More sharing options...
Members mate_stubb Posted April 12, 2013 Members Share Posted April 12, 2013 I end up dialing my 8 Q12s back to make my 60W scanners cut, when the scanners are using some of the weaker colors. I would expect the Fab5s to be stronger, and the XMoves to be weaker, than my setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.