Members Not Serial Posted March 15, 2007 Members Share Posted March 15, 2007 setup the Gl2200 with the srx setup and had some odd behaviour. mostly the LEFT MASTER led's didnt light up until i hit them really good. passed signal fine however. right side worked fine (was hooked up stereo) also, channel 24 is dead. aint nothing happening there on anything. tried xlr and trs inputs. do these things have ribbons in them like the mackies? thats what its acting like (yes, i have to deal with mackie ribbon issues occasionally). Link to comment Share on other sites More sharing options...
Members agedhorse Posted March 16, 2007 Members Share Posted March 16, 2007 Yes, I believe so... pretty much everyone uses IDC ribbons these days. Link to comment Share on other sites More sharing options...
Members Carey D Posted March 16, 2007 Members Share Posted March 16, 2007 setup the Gl2200 with the srx setup and had some odd behaviour. The channels and masters are built on individual circuit cards with IDC ribbons connecting them. The faults you mention sound like bad connections but may not necessarily be due to the harnesses. Some more diagnostics would help. Contact A&H tech support to help you identify the fault and provide any servicing needed. If you need more from me let me know.All the best,Carey (A&H design) Link to comment Share on other sites More sharing options...
Members Not Serial Posted March 16, 2007 Author Members Share Posted March 16, 2007 thank you. this mixer will likely be used until end of season and then sent in for repairs. it functions very well otherwise. Link to comment Share on other sites More sharing options...
Members TimmyP Posted March 17, 2007 Members Share Posted March 17, 2007 Pull the bottom off, then unplug and replug all of the ribbons a few times. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.