Members georgestrings Posted May 21, 2009 Members Share Posted May 21, 2009 ...anyone know where the best deal is on one of those???? Thanks, - georgestrings Link to comment Share on other sites More sharing options...
Members soul-x Posted May 21, 2009 Members Share Posted May 21, 2009 Generally, there's not a whole lot of room to deal pricing-wise on replacement parts. Give the business to you local dealer. Link to comment Share on other sites More sharing options...
Members tlbonehead Posted May 21, 2009 Members Share Posted May 21, 2009 Generally, there's not a whole lot of room to deal pricing-wise on replacement parts.Give the business to you local dealer. This, plus the fact that my local dealers always beat the online prices pretty easily anyway. Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 21, 2009 Members Share Posted May 21, 2009 The only problem with these is finding them. There is only one production run every year. I have a couple of sources. One in Texas, and Peavey directly. Are you putting them into subs? If so, consider changing them out with the Lo-Rider version. AudioLines has them seemingly on sale. And so does peavey(maybe not on sale). If you do go that route, you have to buy the magnet as well. The BW magnet does not work. The Lo-Riders are more likely to be found throughout the year. Link to comment Share on other sites More sharing options...
Members Coaster Posted May 22, 2009 Members Share Posted May 22, 2009 there is no way that can be the right price! i think something is wrong there dale. otherwise i'll take two at that price. Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 Does seem a little strange. The last ones I bought were near $200 each. That was from that place in Texas. If you call Peavey, they can tell you who has some in stock. Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 They have the concentric air cooler fins on the magnet. I think so anyway, can't see real well, the picture is kinda small. Link to comment Share on other sites More sharing options...
Members RoadRanger Posted May 23, 2009 Members Share Posted May 23, 2009 there is no way that can be the right price!I don't see the 18" low rider listed on Peavey's website - maybe they are discontinued and being sold off cheap? EDIT>Oops, didn't see that was AudioLines - a notorious "bait & switch" operation. If you order something you will get a call a few days later telling you that what you ordered is out-of-stock and they will try to upsell you. Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 Upsell a low rider? not likely. Link to comment Share on other sites More sharing options...
Members Coaster Posted May 23, 2009 Members Share Posted May 23, 2009 Upsell a low rider? not likely. lomax - like the versarrays. probably not good in a generic box though(?) i don't know a lot about the lomax. Link to comment Share on other sites More sharing options...
Members gonzobassman Posted May 23, 2009 Members Share Posted May 23, 2009 That is one helluva number for Lo-Rider 18s by Peavey! Or is that just the price on replacement baskets? Link to comment Share on other sites More sharing options...
Members Coaster Posted May 23, 2009 Members Share Posted May 23, 2009 gotta be a scam. Link to comment Share on other sites More sharing options...
Members Dookietwo Posted May 23, 2009 Members Share Posted May 23, 2009 The only problem with these is finding them. There is only one production run every year. I have a couple of sources. One in Texas, and Peavey directly.Are you putting them into subs? If so, consider changing them out with the Lo-Rider version. AudioLines has them seemingly on sale. And so does peavey(maybe not on sale). If you do go that route, you have to buy the magnet as well. The BW magnet does not work. The Lo-Riders are more likely to be found throughout the year. http://www.audiolines.com/search.php?mode=search&page=1 These are open box/demo speakers? Who knows what they have been through.. Dookietwo Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 Hey, I wasn't endorsing audio lines. I just found them for a better price. I know that doesn't mean anything. You get what you pay for. What I do know is that when I put the LoRiders in my DTH subs, they came to life. And really pound hard. Half a QSC3402 on each driver through an NL8 connector on four of the conductors. The other four are for the tops. Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 lomax - like the versarrays. probably not good in a generic box though(?) i don't know a lot about the lomax. [opinion] I wouldn't think that the lo max driver would work in even the QW boxes. Much less the type of box the BW comes in. [/opinion] Disclaimer - I don't know very much about the lo max speaker either. Link to comment Share on other sites More sharing options...
Members djdfw Posted May 23, 2009 Members Share Posted May 23, 2009 Hey, I wasn't endorsing audio lines. I just found them for a better price. I know that doesn't mean anything. You get what you pay for. What I do know is that when I put the LoRiders in my DTH subs, they came to life. And really pound hard. Half a QSC3402 on each driver through an NL8 connector on four of the conductors. The other four are for the tops. We have a pair of DTH 118s http://www.peavey.com/media/pdf/manuals/80300276.pdf and one of the 1801-4 drivers is bad. This looks like this low rider driver will handle a LOT more power if I can get it to the speaker than the BW 1801-4 in those cabs, but the lowrider is 7-8 ohm instead of the 4-6 ohm of the 1801-4. Could you tell a little more about your experiences with your dth? They match the cabinet well? We might want to go ahead and replace both the drivers in the DTH cabs with these and add them to a pair of JBL 4719x (4 ohm) subs on a Tapco 2500 watt amp (This should give me ballpark 1200 to 1300 watts per side with one JBL and one DTH on each side). I also am looking at another pair of DTH 118s locally and might get them and throw them into the rig as well (pair of 118s per side on one amp, pair of 4719x cabs on another amp) Mongo like candy. DJ like bass. I keep seeing everyone say not to bridge to the speakers. The JBL speaker rates program of 1200 watts and the Tapco amp bridges 4 ohms at 2500 watts (that is what, up to 5k watts in hard clipping or am I wrong on that?). I suppose the amp even turned down halfway will still provide large (dangerous) power even with a 30hz high pass and a crossover around 100 hz. I am just not going to get the power of half a qsc 3402 without bridging from my current current. I don't really know how much juice I would get out of a 20 amp circuit in any event at 120 and wheter it would be worth it to put a larger power amplifier on a 20 amp circuit. I would really like to hear what the wiser heads here think.... Finally, what do you think about defeating the 30hz high pass filter on the amp and using an EQ to try and drop the lows to around 20 to 25 hz? Am I just asking for trouble? Thanks! Tapco Juice 2500 Amp: Continuous Sine Wave Average Output Power per channel, both channels driven, 20 Hz to 20 kHz 2 ohms: 1400 W 4 ohms: 750 W 8 ohms: 575 W Bridged Mono Operation, 20 Hz to 20 kHz 4 ohms: 2500 W 8 ohms: 1500 W DTH 118: http://www.peavey.com/media/pdf/manuals/80300276.pdf 6 ohm nominal 4 ohm minimum 350 watts continuous 700 watts program 1400 watts peak 50hz-250hz (50hz -3db) JBL 4719x 1200 watts program (@ 4 ohms) Frequency range: 30Hz to 300Hz ================================= Drivers BW 1804-1 http://www.instrumentpro.com/P-PEA0560460.html Peavey 1801-4 LT BW Features: Impedance: 4 Ohms Power capacity: 1400 W Peak, 700 W Program, 350 W Continuous Sensitivity: 97.5 dB / 1 W 1 m Usable freq. range: 35 Hz ~ 1 kHz Cone: Kevlar® impregnated cellulose Voice coil diameter: 4.0 inch / 100 mm Replacement Basket http://www.peavey.com/products/browse.cfm/action/detail/item/116652/1801-4%20LT%20BW%20RB.cfm Low Rider 18 http://www.instrumentpro.com/P-PEA0560600.html Peavey 18" Low Rider Subwoofer Specifications: Impedance: 8 Ohms Power capacity: 3200 W Peak, 1600 W Program, 800 W Continuous Sensitivity: 97.3 dB Usable freq. range: 25 Hz ~ 1 kHz Cone: Kevlar Link to comment Share on other sites More sharing options...
Members 6Imzadi Posted May 23, 2009 Members Share Posted May 23, 2009 Low rider and lo max are IMO two different animals. My DTH cabs are 218 and came equipped with the 1888-8 HP drivers originally. The Low riders are a very close replacement. I don't know how close the 1801-4 are to the Low rider. You could try it. Re: JBL and DTH on the same side of the stage. You may find that the JBL is more sensitive and gets louder with the same power. Therefore, you try to turn up the DTHs and boom. You blow them up. I think if you need to mix two different types to have both the same type on one side. Always use the high pass filter at the minimum of 30hz. I wouldn't dream of using my subs without the HPF. I have 5 amps (3 QSC 3402) on 2 20A circuits. Never breaks a breaker. Link to comment Share on other sites More sharing options...
Members agedhorse Posted May 23, 2009 Members Share Posted May 23, 2009 no hpf is just nuts IMO. Link to comment Share on other sites More sharing options...
Members georgestrings Posted May 23, 2009 Author Members Share Posted May 23, 2009 Generally, there's not a whole lot of room to deal pricing-wise on replacement parts.Give the business to you local dealer. You know, I would - except my local dealers really aren't worth bothering with, and can't/won't compete with mail order... Truth is, other than buying used gear at Daddy's Junky Music, the rest of my local dealers are pretty much useless - why should I spend more with them if I can get it cheaper elsewhere??? Parts Express sells the replacement basket for around $100 - that's probably the way I'll go... I won't be buying anything more expensive, as these are intended to be a pair of low cost 118 subs to pair up with my SP118s when I need them... Thanks for the replies, everyone... - georgestrings Link to comment Share on other sites More sharing options...
Members tlbonehead Posted May 24, 2009 Members Share Posted May 24, 2009 You know, I would - except my local dealers really aren't worth bothering with, and can't/won't compete with mail order... Truth is, other than buying used gear at Daddy's Junky Music, the rest of my local dealers are pretty much useless - why should I spend more with them if I can get it cheaper elsewhere???Parts Express sells the replacement basket for around $100 - that's probably the way I'll go... I won't be buying anything more expensive, as these are intended to be a pair of low cost 118 subs to pair up with my SP118s when I need them...Thanks for the replies, everyone... - georgestringsThat's weird. My local dealers give me better prices than the online businesses. Link to comment Share on other sites More sharing options...
Members georgestrings Posted May 24, 2009 Author Members Share Posted May 24, 2009 That's weird. My local dealers give me better prices than the online businesses. Believe me, if they would atleast try to be a bit competitive, I'd give it a shot - besides, they really don't offer much in the way of services, or keeping a useable inventory around, either... So, if I have to "order" through them, still wait for something to come in, THEN pay tax and their mark-up, why shouldn't I just order it myself, and save hassle and money??? I understand the plusses of supporting local dealers, but it's a lost cause in my area... - georgestrings Link to comment Share on other sites More sharing options...
Members djdfw Posted May 24, 2009 Members Share Posted May 24, 2009 Thanks for the info gentlemen! There were a pair of DTH 118s on CL locally for $500, but they sold the day I saw the ad (before she got my message) : ( I thought they would match well with my pair of DTH 118s. I will look around for more specs on the particular drivers (low rider, 1801-4, etc....) and will post them if I find them. http://www.peavey.com/support/technotes/misc/blackwidow.cfm I suspect there is a good chance I will either recone or replace the basket on the one DTH 118 if it is not something as simple as a loose wire from moving the boxes. After reading a paper, http://www.peavey.com/support/technotes/hartley/chapter_4.pdfI have a better handle on electrical watts from the wall vs musical watts from the amp (capacitors have something to do with it much as free will has something to do with evil existing in the world). I see that 120 volts x 20 amps = 2400 watts maximum from the wall, but because power from the amplifier is musical and amplifiers have capacitors, power amps larger than 2400 watts can store energy to provide greater than 2400 watts on peaks though the wall normally only supplies a maximum of 2400 watts. I had noticed our amplifiers did not draw nearly as many amps as I would have expected when I metered them. http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200321255_200321255 We always kept the high pass filter engaged (and the clip limiter is always engaged and taped that way as well) and I think that is the safest way to do it and a good habit to keep. It is probably a bad idea to use a steep xover at a lower frequency to try and squeeze out lower lows. Better to be safe and stay within factory limits and still have speakers for the next show... We aren't bridging the nicer subs because I am afraid of overpowering the sub. When we need more lows, we just add more cabinets and use both channels and add more amps and cabinets as needed. We are using one side of an amp to run one 4719x sub and that is 750 watts maximum. Adding a sub to the other side for more sound is easy to cable, but these subs are large and heavy (almost 200 lbs each for the 4719x and the DTH are HUGE and heavy). I would like to get maximum efficiency from our cabs and amps while staying within reasonable bounds of safety and wonder if bridging one sub is too dangerous. I have bridged an 800 watt amp to a Peavey 218 (2,000 watt program rating) at times to give extra bass. Using a sub with a program rating of 1,200 watts and a peak rating of 2,400 watts, would it be generally acceptable to bridge a 2,500 watt amp and keep the level controls no greater than half? This assumes that nobody else (no guest djs) will be operating the system and we keep the mixer in the green. Link to comment Share on other sites More sharing options...
Members RoadRanger Posted May 24, 2009 Members Share Posted May 24, 2009 Using a sub with a program rating of 1,200 watts and a peak rating of 2,400 watts, would it be generally acceptable to bridge a 2,500 watt amp and keep the level controls no greater than half? This assumes that nobody else (no guest djs) will be operating the system and we keep the mixer in the green.No. Link to comment Share on other sites More sharing options...
Members djdfw Posted May 24, 2009 Members Share Posted May 24, 2009 ok. Thanks. Is it just the power or is there something else I am missing too (just keeping it to bridging lol) Link to comment Share on other sites More sharing options...
Members RoadRanger Posted May 24, 2009 Members Share Posted May 24, 2009 That 2400w amp can probably do 500w into each sub in stereo which will give them (and your amp) a long life and you only loose 2-3db over cooking the $%^& out of them . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.