Members Unalaska Posted April 10, 2013 Members Share Posted April 10, 2013 I bought a yam GA32/12 with a flight case I just couldn't pass up the deal. But all the aux sends are XLR output. All my mon amp racks are configured with trs to XLR whips (which means I can swap with XLR to XLR easily) and all the analog fx units use TRS only.The easy solution is use barrel adaptors, the down side is I'm not sure in want the added strain of that adaptor on the XLR connector. Usually I'd make a 4 or 6 channel XLR to 1/4 fem whip but the parts would be expensive. I don't see much for prefade stuff either. Eh, just thinking out loud. Link to comment Share on other sites More sharing options...
Members basschaplain Posted April 10, 2013 Members Share Posted April 10, 2013 I use these:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/Adaptor_Cables_2.shtml Link to comment Share on other sites More sharing options...
Members Unalaska Posted April 10, 2013 Author Members Share Posted April 10, 2013 I also use the 1/4 male TRS to XLR cables or make my own. But for 1/4 female... Link to comment Share on other sites More sharing options...
Members StratGuy22 Posted April 12, 2013 Members Share Posted April 12, 2013 These are the ones I've used. They also lock. Neutrik http://img2.shopimg.ca/content/zoom/21019041_main_zoom.jpeg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.