Members jlb Posted July 23, 2013 Members Share Posted July 23, 2013 I had a coustomer complaint this past weekend concerning the XLF's. I have spent the morning checking them out and am stumped. It seems that something is going on with the input/output connectors. When connecting two subs together, the second one in the chain has very little output. This is happening with all 4 subs. The only way to get normal output is to run both subs off the L/R mixer outputs or Aux outs.There is no problem with the the output/inputs from the subs to the tops. Ideas? Link to comment Share on other sites More sharing options...
Members nchangin Posted July 23, 2013 Members Share Posted July 23, 2013 Any way to route those outputs to input of a mixer so you can visually see the signal to rule out the signal chain being the issue? Link to comment Share on other sites More sharing options...
Members jlb Posted July 23, 2013 Author Members Share Posted July 23, 2013 Stupid me. The crossover switch was engaged on the first sub. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.