Members lonotes Posted September 21, 2013 Members Share Posted September 21, 2013 Just as the header says. I am having difficulty with my monitors in that even though the display says that auxes 1-4 are pre eq, any changes that I make to FOH seems to affect the monitor eq. I know that there are several O1V96 users here, and that this cannot be acceptable for live application. To those that have gone before me, I seek your advice. Link to comment Share on other sites More sharing options...
Members Dookietwo Posted September 22, 2013 Members Share Posted September 22, 2013 If your monitors are of good quality and the feedback rings are taking out before the show I would much rather have post eq sends to my monitors. Thats how I've done it for 10+ years with my 01v96. In any event if your not using the 2nd layer you can assign preamp 1 to channel 1 and channel 17 on layer 2. Preamp 2 to 18 etc. Then Mix the monitors off from layer 2. This will let you eq the monitor channels seperate from the main mix on the channel strip.Not that hard at all once you get used to it.Dookietwo Link to comment Share on other sites More sharing options...
Members dbMontana Posted September 22, 2013 Members Share Posted September 22, 2013 Yup, the main fellow I've "apprenticed myself to" over the summer double busses at least all the vocals (and more if he has the channels) on his LS9-16 with one set going to monitors and the other to FOH. Works very well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.