Members wro Posted April 28, 2015 Members Share Posted April 28, 2015 can someone please take a look and let me know what i am doing wrong here ? just trying to add effect to channel 1, then comes this rattling noise. see the video Link to comment Share on other sites More sharing options...
Members agedhorse Posted April 28, 2015 Members Share Posted April 28, 2015 How is your return signal routed? I am assuming you are using the internal effects, is this correct? Link to comment Share on other sites More sharing options...
Members Dingoist Posted April 29, 2015 Members Share Posted April 29, 2015 You've got clip leds on three channels that have no inputs, and you've nothing connected to the alt 3/4 -- so I wouldn't expect the alt 3/4 sliders to have any impact (unless I am mistaken). You hear the noise when you flip the internal stereo fx back out to main mix instead of alt 3/4. FX1 is supposed to be hall reverb IIRC. Can't really see what is wrong. It's hard to see the settings clearly on the video. A description of the problem would help better. Though seeing those clip leds with no input is worrisome about the health of the board. Link to comment Share on other sites More sharing options...
Members agedhorse Posted April 29, 2015 Members Share Posted April 29, 2015 I believe the clip LEDs also serve as mute LEDs on that mixer??? Link to comment Share on other sites More sharing options...
Members Michael Lapke Posted April 29, 2015 Members Share Posted April 29, 2015 can someone please take a look and let me know what i am doing wrong here ? just trying to add effect to channel 1, then comes this rattling noise. see the video Dear wro, Please reach out to our CARE department so that we can help. You can reach us by phone at 702-800-8290 or +44 1562 732290 (UK) or send an email to CARE@music-group.com. We'll get you up and running. Best, Michael LAPKE Specialist, Customer Experience, Engagement MUSIC Group BEHRINGER Link to comment Share on other sites More sharing options...
Members Dingoist Posted April 30, 2015 Members Share Posted April 30, 2015 The mute / alt-3-4 led is the led above the clip led, and only one channel IIRC on the video is set to mute / alt. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.