If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I want to find or make a foot pedal switch that will "bleep" me and cut out my mic (or at least cover it up).
just make one, all you need is a XLR in, an XLR out and a stomp switch wired between the signal lead...some wire, some solder...and a box.
"We are currently experiencing some technical difficulties due to reality fluctuations. The elves are working tirelessly to patch the correct version of reality. Activities here have been temporarily disabled since the fundamentals of mathematics, physics and reason may be incomprehensible during this indeterminate period of instability. Normal service will be restored once we are certain as to what 'normal' is."
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally used up and worn out, shouting '...man, what a ride!'
"The greatness of a man is not in how much wealth he acquires, but in his integrity and his ability to affect those around him positively" ~Bob Marley
in the other. Set it for a 1Khz tone and when you switch to the B input it will sound like your bleeping yourself! I haven't tried it and personally, but you may have to change out the foot switch to a momentary switch (contact RDL,they've always been helpful and know their products well) and possibly find a way to adjust the volume on the signal generator. Another option for that, although not as sleek, might be one of these instead:
How about the "low Tech approach"...a bulb horn set is near on mic stand or pedal board, where ever is convenient, and the bulb stepped on as needed...if not loud enough "acoustically", a small inexpensive mic can be installed...