Members OPEN OCEAN Posted July 18, 2009 Members Share Posted July 18, 2009 hi all just looking for the manual in pdf and any sound banks are there any dedicated sites about this one ? Link to comment Share on other sites More sharing options...
Members flat earth Posted July 18, 2009 Members Share Posted July 18, 2009 Has quite alot of links, resourses + info. Has MR Rack pdf download which might be useful. http://www.fumph.com/?page_id=4 Link to comment Share on other sites More sharing options...
Members niacin2.0 Posted July 18, 2009 Members Share Posted July 18, 2009 http://www.syntaur.com/ensoniq.html, manual available to purchase in hardcopy, and there's a soundbank of stuff available on floppy that makes some good use of transwaves. Link to comment Share on other sites More sharing options...
Members OPEN OCEAN Posted July 19, 2009 Author Members Share Posted July 19, 2009 hey thanks guys !!! Link to comment Share on other sites More sharing options...
Members OPEN OCEAN Posted October 13, 2011 Author Members Share Posted October 13, 2011 Got the beast back so anybody knows how do i use it as a 16 channel midi workstation with cubase ? doesnt seem to be that straightforward do i have to assign a sound to each channel every time ? Link to comment Share on other sites More sharing options...
Members JeffLearman Posted October 14, 2011 Members Share Posted October 14, 2011 IIRC, if you press any button on the sequencer, it goes to sequence mode where it responds to MIDI on all 16 MIDI channels. If Cubase sends a program change on each channel at the beginning of the song, you should be set. So, the answer is "yes" but you can get Cubase to do that for you by recording the program selection for each track. Not sure the easiest way to do that, however. Be aware that many of the MR's sounds use the global FX, but you get only one global FX to use for all tracks in 16-track mode. So, many sounds won't sound the way you might expect. (It's a little more complicated than that; you get 1 global FX, 1 insert FX, plus the global reverb bus, or something like that .. the point being there are limited resources and all tracks have to share them.) Link to comment Share on other sites More sharing options...
Members evt/vermont Posted February 27, 2013 Members Share Posted February 27, 2013 Ensoniq MR 76 sustain pedal doesn't work .... Helpthe sustain pedal on my 11 year old Ensoniq mr 76 doesn't work. It used to work just fine. Please someone, anyone help me set up my keyboard so that the sustain pedal will work and sustain. I Link to comment Share on other sites More sharing options...
Members JeffLearman Posted March 1, 2013 Members Share Posted March 1, 2013 It is possible to reassign the pedal to another function. Resetting to factory is worth a try. When I get home I can check the manual for how to do that (if you don't know), and I can tell you where to check how the sustain pedal is assigned. If for some (unlikely) reason the sustain input is broken, there's a chance you can get the sostenudo pedal input to work instead. We can burn that bridge when we come to it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.