Members jorhay1 Posted November 1, 2013 Members Share Posted November 1, 2013 Hi Guys, I have all three of the Volcas, sync'd with the sync cables, Midi'd with DAW (Live, PT, Logic, etc), audio patched into a patch bay.I was having bad crosstalk.When I played one, the audio could be heard on the channel of another.Long story short, I did trouble-shooting for days, with every possible re-patching, bypass patchbay, change cables, etc.Finally tracked it down to the sync cables factory supplied.For me, when all three are connected via sync, There is bad crosstalk.Don't know if this is a known issue, or if it's just my set. Thanks! Link to comment Share on other sites More sharing options...
Members cresshead Posted November 1, 2013 Members Share Posted November 1, 2013 maybe they're unshielded cable..try some others. I only have the volca Bass right now so i cannot test for you! Link to comment Share on other sites More sharing options...
Members jorhay1 Posted November 1, 2013 Author Members Share Posted November 1, 2013 cresshead wrote: maybe they're unshielded cable..try some others. I only have the volca Bass right now so i cannot test for you! Thanks cresshead, That's a good idea. The sync are ring tip sleeve, 1/8 inch.Will take me a second to track down/order some high end ones, but will do and get back.These are the cables that shipped with the unit, so I imagine this should have been factory tested.It also might be the combo between my audio and sync cables.I just hope it's nothing internal.Man I love these boxes! Link to comment Share on other sites More sharing options...
Members cresshead Posted November 1, 2013 Members Share Posted November 1, 2013 wrong thread! opps! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.