Members Alien_Vamp Posted March 17, 2016 Members Share Posted March 17, 2016 Hi everyone! I'm building a Mesa Recto Traditional 4X12 cab. Does anyone know the round over size on the sides for the cab? Some say it's 1/2", some 3/4". And some even that it's both (buttom and top 3/4", sides 1/2"). Who can tell me for sure? Link to comment Share on other sites More sharing options...
Members Mikeo Posted March 19, 2016 Members Share Posted March 19, 2016 I'm working on it for ya. Found the Marshall 1960A, but not yet the Mesa. http://www.thetonedoctor.com/4x12-Cabinet-Plans.html Mesa cabs are deeper.Anyway I also saw on line there are 2 different Rectro 4-12', Might be different years, but I don't know.If I find anything more, I will get back to you. If there's a dealer in you area, might be worth a visit. Link to comment Share on other sites More sharing options...
Members Mikeo Posted March 19, 2016 Members Share Posted March 19, 2016 This might help Looks like Fender stuff is about 1/2" or 12mm. http://www.tube-town.net/ttstore/Parts-for-Cabs/Corners:::147_181.html Marshall 25mm Mesa might even be different If I find anything else, I'll let you know. More research needed. Link to comment Share on other sites More sharing options...
Members Alien_Vamp Posted March 19, 2016 Author Members Share Posted March 19, 2016 Thanks for the Info. I have a Marshall Cabs. I need Traditional Recto 4X12 only. I researched a lot, but nothing about the info I need.From what I see on the pictures I think the Front is 1/2" and sides 5/8". But need to know for sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.