Jump to content

Peavey Predator - 1994 - I need a neck plate for this tilting neck... Anyone have one? Which one do I need


csrMark

Recommended Posts

  • Members

A buddy just gave me a body and neck of a Peavey Predator. 1994 model... I need a bridge plate and 4 screws. I checked eBay but there seems to be different types of neck plates for USA made peavey's. I see neck plates for what appears to be different necks and they use T15, T30, T45, T60, etc.... Which one do I need for this?

 

Also, anybody have one lying around with screws they want to part with? Let me know

Link to comment
Share on other sites

  • Members

This looks to be the right one. http://www.ebay.com/itm/Vintage-Peavey-USA-Predator-Neck-Plate-Screws-Also-Other-Models-t/111580651211?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29310%26meid%3Db1d67227f9e844449a50e7e408b19a77%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D111580651215&rt=nc

 

It does look like its the same as a Fender micro tilt neck plate. Drilling a hole in a standard neck plate wouldn't be that hard to do, or enlarging a hole on one like this so you can get to the alien screw for adjustment wouldn't be that hard. Once the tilt is set its not something you need constant access to. You can use washers on the screws without a plate, set the tilt so the bridge can be adjusted, then just put a solid plate on there.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...