Members Li10 Posted April 29, 2007 Members Share Posted April 29, 2007 hey can someone describe to me how pickups are made and what makes good pickups good? Humbuckers are just two single coils next to each other, right...? Yeah, I'm thinking about making my own electric guitar. It would be awesome to have my own instument. Link to comment Share on other sites More sharing options...
Members DougH Posted April 29, 2007 Members Share Posted April 29, 2007 Stew mac sells guitar building parts but does has some how to info. The short answer is that a double coil is basically two single coil wired together in a way that lets them canceel the huming form the cycling of electricity. There are construction differences even between different type of double coils. More info below form people that know a heck of a lot more than I do about it. http://www.stewmac.com/freeinfo/I-4000.html -Everything you most likely wanted to know about guitar wiring. http://www.stewmac.com/freeinfo/I-1465.html -Here is specific about making pickups. Link to comment Share on other sites More sharing options...
Members daddysguitar Posted May 1, 2007 Members Share Posted May 1, 2007 Here's a whole 'nuther thread on the subject, Li10:cool: http://acapella.harmony-central.com/forums/showthread.php?t=1605607 Link to comment Share on other sites More sharing options...
Members UfoPilot Posted May 17, 2007 Members Share Posted May 17, 2007 I posted this in the other thread.You can use #42, #42, or #44 wire, The bigger the wire the fewer winds you can get on the bobbin and the brighter the coil will sound. If you are doing only one or two, you can use a cordless drill for the winding motor. the start of coil A is connected to the start of coil B and both coils are wound in the same direction. Here is a link to stewmac's instructionshttp://www.stewmac.com/shop/Electron...1.html#detailsHere's how I do it, minus a few steps. http://mysticpickups.com/MysticPickups/Assembly.html Link to comment Share on other sites More sharing options...
Members cx04332 Posted May 17, 2007 Members Share Posted May 17, 2007 Anyone know how to construct low impedance pickups like on the Les Paul below? Link to comment Share on other sites More sharing options...
Members UfoPilot Posted May 24, 2007 Members Share Posted May 24, 2007 Anyone know how to construct low impedance pickups like on the Les Paul below? low impedance pickups use active electronics to amplify the signal. Like EMG's. Link to comment Share on other sites More sharing options...
Members helmvoltz Posted May 24, 2007 Members Share Posted May 24, 2007 Read About magnetism , mettallurgy, and simple electronics theres an iron yolk surrounded by a plastick and the plastick is wraped with copper wire(silver wire would be better as it has less resistance making it a more accurate conducter).The more wire thats wrapped around the coil the heavyer the sound ,the less wire will give more of a telecaster sound.Wire comes in different thickness I dont know whats best but as long as its above 0.5 mm thickIf you make a humbucker ,both yolks have to be Exactly the same size And the wire coil has to be Exactly the same legnth.In order that they are perfectly balanced. Link to comment Share on other sites More sharing options...
Members Li10 Posted May 24, 2007 Author Members Share Posted May 24, 2007 hmm maybe I should make single coils... thanks for the tip about less wire giving a more telecaster sound, that'll come in useful, as I'm aiming for a sort of custom tele/random guitar. Sort of with the tele sound, but with better.... uh, stuff. Link to comment Share on other sites More sharing options...
Moderators isaac42 Posted May 24, 2007 Moderators Share Posted May 24, 2007 Humbuckers are not just two coils next to each other. The coils are wound in the opposite direction, so that any signal induced in them electrically is reverse polarity, cancelling itself out. The same thing would happen with string vibrations, except that the magnets are also reversed, so that the signal induced in the coils by the strings are therefore reversed as well. As a result, the electrical noise is reversed once, and gets cancelled out. String vibrations get reversed twice, and so come out in polarity. Pretty damn clever, I say. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.