Jump to content

Squire '51 Project in a box


Yavin

Recommended Posts

  • Members

SOLD!

 

Here is a project I picked up from a fellow forumite a few months back and just don't have time for. It is a '51 in sparkle red with the neck pup hole plugged (can see the outline around the plug) and the control plate area routed for a recessed control plate. I have material for a PG to be cut and all stock parts appear to be there (except the neck pickup). Will include the original control plate and a standard squire '51 PG. Additional Pics here.

 

3836156701_b951591b78.jpg

 

Needs to be wet sanded and polished. Paint appears a bit thin on the edges and primer shows a touch on the inside corner of the upper horn. Make me an offer. Trades or cash. Try me with anything.

Link to comment
Share on other sites

  • Members

OK. Talked to the guy I got it from. He says the neck came from a parts caster he had. My bad. I never even considered that the '51s all had maple boards. Brain just stopped functioning I guess.

 

Make me an offer. Probably will take a trade on the table already if nothing by Monday.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...