Jump to content

FS: Carvin Mahogany HSS Bolt


Blacktip

Recommended Posts

  • Members

Great guitar with a lot of upgrade opitions. Mahogany body with plain maple top. 5 piece mahogany neck with 2 maple stripes. Satin finish on the back of the neck. Ebony fingerboard with medium jumbo stainless steel frets. 12" radius. 1 11/16" nut. Sperzels. Neck is very stable and will play at low action without any buzzing. No fret wear.

Condition is 9 out of 10. This guitar sells for $1325 today.  I'm asking $700.00 shipped & PPal'd.

 

The Fine Print: The end of the headstock has a couple of dings as shown in the photo. The edges of the center pickup bobbin are slightly worn in some places and to a lesser degree the neck pickup on one side has this. The 2 latches on the case don't spring all the way up.

 

http://i585.photobucket.com/albums/ss294/Blacktip2/Carvin033_zps923decdd.jpg

 

http://i585.photobucket.com/albums/ss294/Blacktip2/Carvin036_zps52672a6d.jpg

 

http://i585.photobucket.com/albums/ss294/Blacktip2/Carvin045_zpsb064dd22.jpg

 

http://i585.photobucket.com/albums/ss294/Blacktip2/Carvin045_zpsb064dd22.jpg

 

http://i585.photobucket.com/albums/ss294/Blacktip2/Carvin046_zpsd6530822.jpg

 

 

 

I had a black pickguard made for this guitar with a larger humbacher cut out with 2 mounting holes for a SD JB. Two of the perimeters holes don't match so you would need to plg and re-drill the two body holes. You can have it if you like N/C. I've boght and sold a lot of stuff on TGP.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...